Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Dimension Softwood Lumber
MRC:
An indication of the species and grade of the item,and the grading association.CQWY
Species-grade And Grading Association:
Any acceptable no. 3 northeastern lumber manufacturers association or any acceptable no. 3 northern hardwood and pine manufacturers association or any acceptable no. 3 west coast lumber inspection bureau or any acceptable no. 3 western wood products association or any acceptable utility northeastern lumber manufacturers association or any acceptable utility northern hardwood and pine manufacturers association or any acceptable utility west coast lumber inspection bureau or any acceptable utility western wood products association or pine, southern no. 3 southern pine inspection bureau or pine, southern utility southern pine inspection bureau or redwood no. 3 redwood inspection service or redwood utility redwood inspection service
MRC:
The moisture content retained in the item after seasoning,expressed in percent.CRCL
Err Default:
Err default
MRC:
The moisture content retained in the item after seasoning,expressed in percent.CRCL
Moisture Content Retention Percentage:
19.0
MRC:
A measurement of the longest dimension of an item,in distinction from width.CRJD
Random Length:
6 ft and longer w/ maximum of 10 pct 6-9 ft, min of 40 pct 14 ft and longer
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness,its location on the item,and the measuring method used.CRPW
Width-location And Measuring Method:
4.000 inches specified
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
6.000 feet random
MRC:
The extent of surface dressing or roughness of the item.CRYQ
Surface Condition Degree:
Surfaced four sides
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width,its location on the item,and the measuring method used.CSHP
Thickness-location And Measuring Method:
2.000 inches specified
MRC:
The required purpose or application of the typical wood products for which the item is intended.CSTS
Typical Wood Products Use:
Stud use including use in load bearing walls
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
U/i-board foot
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81348-mm-l-751 government specification
