Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Air or kiln dried
NSN
National Stock Number:
TXT
Description:
Hardwood Lumber
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.CQKJ
Random Width:
4 in. And wider, requiring a min of 60 percent of the contract line item quantity to be furnished in widths 6 in. And wider
MRC:
An indication of the species and grade of the item,and the grading association.CQWY
Species-grade And Grading Association:
Oak, white select national hardwood lumber association
MRC:
The moisture content retained in the item after seasoning,expressed in percent.CRCL
Moisture Content Retention Percentage:
14.0
MRC:
A measurement of the longest dimension of an item,in distinction from width.CRJD
Random Length:
6 ft and longer, permitting a maximum of 30 percent of the contract line item quantity to be furnished in lengths 6 through 11 ft of which 1/6 may be6 and 7 ft and requiring a min of 30 percent of the item quantity to be furnished in lengths 14 ft and longer
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness,its location on the item,and the measuring method used.CRPW
Width-location And Measuring Method:
4.000 inches tapered end random
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
14.000 feet random
MRC:
The extent of surface dressing or roughness of the item.CRYQ
Surface Condition Degree:
Rough-unsanded full length
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width,its location on the item,and the measuring method used.CSHP
Thickness-location And Measuring Method:
1.250 inches specified
MRC:
The required purpose or application of the typical wood products for which the item is intended.CSTS
Typical Wood Products Use:
Cutting grades for remanufacture
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Typical use--for remanufacture compass and accommodation ladder platforms, pallets, crates and etc, unit of issue--board foot
