Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Bushing, sleeve, flanged, press fit, ream type
NSN
National Stock Number:
TXT
Description:
Sleeve Bushing
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.33 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 0.8140 inches and 0.8150 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 0.608 inches and 0.615 inches
MRC:
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR
Flange Outside Diameter:
Between 0.990 inches and 1.010 inches
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
Between 0.092 inches and 0.096 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Item has a groove under the head 0.030 maximum wide x 0.005min/0.010 maximum deep. It has a radius in the head side 0.005 min/0.010max. Chamfer both ends of bore id 0.010min/0.020 maximum x 45 degrees +/- 5 degrees. Od of body opposite flange is also chamfered 0.005min/0.015 maximum x45 degrees +/- 5 degrees.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Solid, external flange one end
