Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.625 inches and 0.641 inches
MRC:
The length of a straight line which passes through the center of the eye and terminates at the inner periphery.AATK
Eye Inside Diameter:
Between 0.500 inches and 0.505 inches
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
Between 0.484 inches and 0.516 inches
MRC:
A measurement taken at right angles to the length of an opening,in distinction from thickness.ABPP
Opening Width:
Between 0.377 inches and 0.387 inches
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
Between 0.484 inches and 0.516 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the eyelet.AGMV
Eyelet Style:
Round plain
Leg End Thickness:
0.450 inches
MRC:
An indication of the condition of the end.AHNV
End Condition:
Plain
MRC:
The measured load required to break the item in tension.BZQQ
Breaking Strength:
14000.0 pounds
Distance From Bail Center To Hole Center:
Between 1.234 inches and 1.266 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium or zinc
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416 federal specification single treatment response or astm b633 assn standard single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Wire rope
