Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Air Breathing Hose Assembly
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
A measurement of the smallest dimension of the wall,in distinction from length or width.AAGT
Wall Thickness:
0.250 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.750 inches first end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
1.000 inches second end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Round second end
MRC:
The weight per specific length of hose.AMPY
Hose Weight:
5.000 ounces per linear foot
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Err-030 first end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Err-030 second end
MRC:
The length of a straight line which passes through the center of the end,and terminates at the inside circumference.CPYG
End Inside Diameter:
0.859 inches second end
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
20.0 pounds per square inch
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the coupling.CXMG
Coupling Style:
Connector, oxygen hose to regulator (note: applicable to hose assembly, air breathing only.) first end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 1st end coupling
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-626, comp 22, 1/2 h federal specification single material response 1st end coupling
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Fully convoluted w/ wire rings between convolutions
