Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Rod End Clevis
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.249 inches and 0.251 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.428 inches and 0.430 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.489 inches and 0.515 inches
MRC:
A measurement of a straight line extending from the center of a circle to the end.ABPZ
End Radius:
Between 0.235 inches and 0.265 inches
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
Between 0.251 inches and 0.281 inches
MRC:
The length of a straight line which passes through the center of a rod connection bore,and terminates at the circumference.AKYC
Rod Connection Bore Diameter:
Between 0.266 inches and 0.296 inches
MRC:
The distance measured along a straight line parallel to the longitudinal axis which establishes the acceptable depth of the rod connection bore.AKYG
Rod Connection Bore Depth:
Between 0.860 inches and 0.890 inches
Distance From Pivot Pinhole Center To Rod Connection End:
Between 1.860 inches and 1.890 inches
Fork Arm Thickness:
0.102 mils and 0.132 centimeters
Fork Arm Thickness:
Between 0.102 inches and 0.132 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
Between 0.990 inches and 1.010 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1035 or steel comp 1042
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1035 or steel comp 1042
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aisi/sae assn standard 1st material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, class 3 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis
