Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Clip, spring tension
NSN
National Stock Number:
TXT
Description:
Spring Tension Clip
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.100 inches and 0.106 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 0.990 inches and 1.010 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.400 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.016 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
0.360 inches
MRC:
The number of mounting facilities provided.AKPV
Mounting Facility Quantity:
2
MRC:
The number of holes provided.ASXK
Hole Quantity:
2
MRC:
The means of attaching the item.AXGY
Mounting Method:
Unthreaded hole
MRC:
The length of a straight line which passes through the center of the mounting facility,and terminates at the circumference.CLMQ
Mounting Facility Diameter:
0.103 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Heat treatment after forming as supplied by vendor carbon steel 175, 000 to 215, 000 psi tensile strength 80-83 rockwell on 15 n scale; beryllium copper 123, 000 to 170, 000 psi tensile strength 73 to 79 rockwell on 15 n scale
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel or copper alloy 172 or copper alloy 170
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a684 assn standard 1st material response or astm b194 assn standard 2nd material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, class 2, type ii federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Standoff
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Distance between end and 1st hole 0.200 porm 0.005; distance between 1st and 2nd hole 0.600
