Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Swaging Rope Terminal
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.141 inches and 0.146 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABHC
Overall Width:
Between 0.340 inches and 0.350 inches
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the circumference.ADCS
Plain Shank Diameter:
Between 0.245 inches and 0.250 inches
Length From Pinhole Center To End:
Between 1.700 inches and 1.720 inches
MRC:
The length of a straight line which passes through the center of the accommodated material,and terminates at the circumference.AHNK
Accommodated Material Diameter:
Between 0.141 inches and 0.146 inches
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
Between 0.142 inches and 0.146 inches
MRC:
The measured load required to break the item in tension.BZQQ
Breaking Strength:
2000.0 pounds
MRC:
The distance measured in a straight line from the bottom to the top of an item.CTHX
Overall Height:
Between 0.290 inches and 0.293 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303se and steel comp 305
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard all material responses
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-t-781 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Ball end
