Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Navy special project
NSN
National Stock Number:
TXT
Description:
Plate Nut Spacer
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.134 inches and 0.140 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Plate nut spacer
MRC:
A measurement of the longest dimension of the nut,in distinction from width.ACVN
Nut Length:
Between 1.266 inches and 1.296 inches
MRC:
The length of a straight line which passes through the center of a thru-hole,and terminates at the circumference.ADAZ
Thru-hole Diameter:
Between 0.448 inches and 0.458 inches
MRC:
A measurement of the smallest dimension of a plate,in distinction from length or width.ADEB
Plate Thickness:
Between 0.086 inches and 0.094 inches
MRC:
A measurement taken at right angles to the length of a plate,in distinction from thickness.ADEC
Plate Width:
Between 0.610 inches and 0.640 inches
MRC:
The means by which the nut is mounted.ADFP
Nut Mounting Provision:
Countersunk holes
MRC:
The side of the plate that the countersink or welding projections are located.ADFR
Mounting Provision Location:
Nut projection side
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
2 holes
Distance From Aperture Center To Mounting Hole Center:
Between 0.497 inches and 0.503 inches
MRC:
A measurement of the center to center distance between the mounting holes along the length.ADFY
Center To Center Distance Between Mounting Holes Along Length:
Between 0.998 inches and 1.002 inches
MRC:
The included angle of the mounting hole countersink.CSSM
Mounting Hole Countersink Angle:
100.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2014 or aluminum alloy 2024 or aluminum alloy 7075
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/3 t6 federal specification 1st material response or qq-a-250/3 t3 or t42 federal specification 2nd material response or qq-a-250/13 t6 federal specification 3rd material response
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
80205-nas463 professional/industrial association standard
