Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Hole entire height of item, 6 holes 0.380 in. Dia
NSN
National Stock Number:
TXT
Description:
Weapon System Resilient Mount
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.640 inches
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
70.0 durometer
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.0747 inches
MRC:
The length of a straight line which passes through the center of the largest end of an item,and terminates at the outside circumference.ADMZ
Major Outside Diameter:
4.060 inches
Flexing Member Height:
0.470 inches
Flexing Member Outside Diameter:
3.120 inches
MRC:
The rated load the item is designed to accommodate at a specified frequency range.BXCW
Load/frequency Range:
Not rated
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 1.710 inches and 1.770 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae 1008, 1010, 1017, 1018 or 1020 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, class 2 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round w/four flanges
