Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Adapter, polish-drum rotor, rear shaft, i.D. Weld
NSN
National Stock Number:
TXT
Description:
Interface Devic Adapter Assembly
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-100-pw-229
MRC:
A measurement of the longest dimension of an item unencumbered by packaging or packing,in distinction from width.AJAF
Unpackaged Unit Length:
27.000 inches
MRC:
A measurement taken at right angles to the length of an item unencumbered by packaging or packing,in distinction from thickness.AJAG
Unpackaged Unit Width:
6.500 inches
MRC:
A measurement from the bottom to the top of an item unencumbered by packaging or packing,in distinction from depth.AJAH
Unpackaged Unit Height:
9.700 inches
MRC:
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.CBME
Cubic Measure:
1702.350 cubic inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Adapter c/o a tool body that connects to a polish machine arm at one end and has a cam actuated polishing foot end that retains fine or ultra fine scotch brite polishing pads
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Adapter is used to polish rear compressor drum rotor p/n 4080102 to restore the rear inner shaft weld joint surface for eddy current inspection adapter is used with drum rotor installed-in pwa71905 fixture mounted on pwa 71991 polish machine with hub end down
MRC:
Literature and references available for information pertaining to the item.RDAL
Reference Data And Literature:
F33657-97-c-0017, serd 9030
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Polish adapter c/o a steel tool body assembly that drives (2) opposing spring actuated honing type shoes. The tool body pilots inside a cam actuator assembly that advances or retracts the opposing spring loaded honing type shoes
