Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
8first end second step 0.625-18unjf-3a thd 0.680 in. L; second end 3.35 in. L bore 0.484 in. Diameter w/cbore 0.6325 in. Diameter cham 60 degrees 0.680 in. Dia, internal spline 13 teeth, 0.5417 in. Pitch dia, 0.500 - 0.505 in. Minor dia, 0.6167 - 0.6257 in. Major dia
NSN
National Stock Number:
TXT
Description:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
External threaded
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
External threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 6.898 inches and 6.912 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Fuel boost pump, rr54660, for f110 aircraft eng
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.3678 inches and 0.3750 inches
First End External Thread Length:
Between 0.430 inches and 0.530 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.9919 inches and 1.0000 inches
Second End External Thread Length:
0.560 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
7
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
1.830 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6709 military specification single material response
