Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Fluid Passage Bolt
Concentric Hole Depth:
Between 1.410 inches and 1.430 inches
Concentric Hole Diameter:
Between 0.359 inches and 0.391 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.865 inches and 1.885 inches
MRC:
A narrative description of the type of end connection.ACKM
First End Connection Type:
Threaded external tube
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACKN
First End Style Designator:
Plain
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of the cotter pin hole,and terminates at the circumference.ADDV
Cotter Pin Hole Diameter:
Between 0.060 inches and 0.080 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.802 inches and 0.822 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
Between 0.543 inches and 0.643 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
MRC:
The distance measured along a line parallel to the longitudinal axis of the bolt end to hole center.BBKK
Distance From Bolt End To Hole Center:
Between 0.115 inches and 0.135 inches
First Diameter From Wrenching Feature:
Between 0.556 inches and 0.560 inches
Second Diameter From Wrenching Feature:
Between 0.490 inches and 0.510 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
Between 0.079 inches and 0.114 inches
Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter:
Between 0.949 inches and 0.989 inches
First Radial Fluid Hole Diameter:
Between 0.219 inches and 0.281 inches
Second Radial Fluid Hole Diameter:
Between 0.219 inches and 0.281 inches
Distance From First Radial Hole Center To End Of Bolt:
Between 1.220 inches and 1.280 inches
Distance From Second Radial Hole Center To End Of Bolt:
Between 0.720 inches and 0.780 inches
Wrenching Feature Height:
Between 0.293 inches and 0.333 inches
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
125000 pounds per square inch
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 26.0 rockwell c and 33.0 rockwell c
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.562 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6758, cond d military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Oxide
