Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Optical Element Retainer
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 3.341 inches and 3.351 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 0.057 inches and 0.067 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.325 inches and 0.335 inches
MRC:
The number of holes or slots included.ABKT
Hole Or Slot Quantity:
2
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
Between 3.526 inches and 3.536 inches
MRC:
A measurement between specified points on the recess,in distinction from height.ABMH
Recess Depth:
Between 0.160 inches and 0.180 inches
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
3.656 in.-32
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
Between 0.057 inches and 0.067 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Cabinet, elec assembly cy-6255/grc and image intensifier assembly mx-8239/uv and power supply pp-179a/grd-1
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Slotted
MRC:
The angular spacing between drive facilities,expressed in degrees.BMTN
Drive Facility Angular Spacing In Deg:
180.0
MRC:
The design of the guide on the item.BMTQ
Guide Design:
Thread chamfer
MRC:
Indicates the location of the guide on the item.BMTR
Guide Location:
Edge opposite drive edge
MRC:
An indication of whether or not an internal annular serration(s) is provided.BMTS
Internal Annular Serration:
Not provided
MRC:
An indication of whether or not a setscrew notch is provided.BMTT
Setscrew Notch:
Not provided
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy and aluminum alloy, qq-a-225/6, alloy 2024, t351
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy and aluminum alloy 2024
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Finish anodize iaw mil-a-8525
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Recessed
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
All fillets 0.005 to 0.010
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Anodized, mil-a-8625, type 2, class 2
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Night vision equip. Emitted and reflected radiation
