Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Thread relief 0.062 in. Width by 0.047 in. Depth and enamel color no. 2430 over olive drab paint
NSN
National Stock Number:
TXT
Description:
Externally Relieved Body Bolt
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.438 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 1.904 inches and 1.908 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.565 inches
Width Between Flats:
0.938 inches
First Diameter From Head:
0.875 inches
Second Diameter From Head:
Between 0.839 inches and 0.849 inches
Third Diameter From Head:
0.938 inches
Fourth Diameter From Head:
0.016 inches
Fifth Diameter From Head:
Between 0.499 inches and 0.500 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
0.062 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
Between 0.122 inches and 0.126 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
Between 0.310 inches and 0.314 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
Between 0.372 inches and 0.376 inches
Distance From Largest Bearing Surface Of Head To End Of Fifth Diameter:
Between 1.342 inches and 1.346 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.375 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
24
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
5
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303se
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint head and enamel head
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint grip and enamel grip
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-s-5002 military specification single treatment response
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Tt-c-595 federal specification 1st treatment response head and tt-e-529 federal specification 2nd treatment response head
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Tt-c-595 federal specification 1st treatment response grip and tt-e-529 federal specification 2nd treatment response grip
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
