Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Second end two cross drilled holes 90 degrees apart
NSN
National Stock Number:
TXT
Description:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Cross drilled and externally threaded
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Cross drilled hole, externally threaded and flat keyway
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.840 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Northington corporation model 7/7/5-3/4x5-6cyl compressor
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.7500 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
0.1360 inches
First End Distance From Hole Center To End:
0.2830 inches
First End External Thread Length:
1.0600 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
0.1250 inches
Second End External Keyway Length:
1.4800 inches
MRC:
A measurement between specified points of the keyway at the second end.AMFT
Second End Keyway Depth:
0.1200 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.6250 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.1360 inches
Second End Distance From Hole Center To End:
0.1600 inches
Second End External Thread Length:
0.6600 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
6
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
1.750 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
