Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Impeller shaft extended 2.00 in. Inlet end with no. 405 woodruff key slot 1 in. From end of shaft
NSN
National Stock Number:
TXT
Description:
Vaneaxial Fan
MRC:
The number of stages incorporated in the item.AAYD
Stage Quantity:
1
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
8.380 inches
MRC:
The direction in which the fluid is passed through the item.ADNK
Flow Direction:
Outward
MRC:
The speed of the drive shaft required to produce the rated capacity of an item,expressed in revolutions per minute.AEQC
Operating Speed At Rated Capacity In Rpm:
7600.0
MRC:
The static pressure measured at the air flow rate specified.AJLY
Static Pressure At Specificationified Air Flow Rate:
0.0 inches of water
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Belt
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
8 unthreaded hole
MRC:
The direction of rotation for which the item is designed.AYSY
Rotation Direction For Which Designed:
Counterclockwise
MRC:
The rated capacity of air flow moved through the item.CQKX
Air Flow Rate:
3450.0 cubic feet per minute
Housing Inside Diameter:
9.200 inches
MRC:
Indicates the type of shaft bearing/s/ furnished.CXHN
Shaft Bearing Type:
Ball
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum housing
MRC:
The measured weight of an item unencumbered by packaging or packing material.PKWT
Unpackaged Unit Weight:
23.000 pounds
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel semigloss housing inside
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel semigloss housing outside
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Fixed
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Xw/motor mtg flat on venturi tube provided w/4 holes tapped 1/4-20 nc-2 by 0.375 in @dp, spaced as rectangular pattern 4.00 in. By 4.75 in., 4.00 in. Dim on longitudal axis of venturi, 1st hole located 2.0 in. From shaft end of venturi
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
13499-009-0225 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
