Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Fluorescent fixture uses f24t12/h0 lamp (2); screened(emi) plastic lens; white color
NSN
National Stock Number:
TXT
Description:
Lighting Fixture
MRC:
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.ABFE
Hazardous Locations/environmental Protection:
Radio frequency interference
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
40.670 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.250 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
6.040 inches
MRC:
The hue or tint of the lens.AEXD
Lens Color:
White, translucent
MRC:
The ability of the lens to transmit light and allow visual perception.AEXK
Lens Transparency:
Translucent
MRC:
The means provided for electrical connection of the item to a power source.AEYB
Wiring Provision Method:
Individual wire
MRC:
Indicates the type of device other than the lens used to direct illumination.AEYJ
Illumination Directing Device Type:
Shield
MRC:
The voltage rating at which the item is designed to operate,expressed in volts.ASXH
Voltage Rating In Volts:
115.0 ac
MRC:
The means of attaching the item.AXGY
Mounting Method:
Screw
MRC:
Indicates the type and number of lenses included in the item.CRLP
Lens Type And Quantity:
1 flat, rectangular w/holes
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel body
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Plastic vinyl body
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
80063-sm-a-777768 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
