Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Optical Element Retainer
MRC:
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.AATX
Shoulder Length:
0.200 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
3.170 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.060 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.570 inches
MRC:
The number of holes or slots included.ABKT
Hole Or Slot Quantity:
4
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
0.150 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
An/vsg-2 (a) ope, an/vsg-2, m60a3tts
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Slotted
MRC:
The angular spacing between drive facilities,expressed in degrees.BMTN
Drive Facility Angular Spacing In Deg:
90.0
MRC:
The design of the guide on the item.BMTQ
Guide Design:
Thread chamfer
MRC:
Indicates the location of the guide on the item.BMTR
Guide Location:
Edge opposite drive edge
MRC:
An indication of whether or not an internal annular serration(s) is provided.BMTS
Internal Annular Serration:
Not provided
MRC:
An indication of whether or not a setscrew notch is provided.BMTT
Setscrew Notch:
Not provided
Flange Thread Size:
3.500in.-28
Shoulder Thread Size:
3.380in.-28
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy, qq-a-200/8, 6061, t6
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/8, 6061, t6 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shouldered
