Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Supports grumman a10 aircraft
NSN
National Stock Number:
TXT
Description:
Spark Plug
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Electrically shielded, partial insulator, gasket seat
MRC:
The opposition to the flow of direct current offered by an item,expressed in ohms.AFYV
Dc Resistance Rating In Ohms:
10000.0
MRC:
A measurement of the longest dimension of the reach,in distinction from width.AHPM
Reach Length:
0.375 inches
MRC:
Indicates the designed use of the item.ALBY
Usage Design:
Engine other than aircraft
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.812 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the electrode.AYGA
Electrode Style:
B1 single flat shell ground electrode (see also style 4)
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the electrode.AYGA
Electrode Style:
Single flat shell ground electrode (see also style 4)
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale,and the location.AYGB
Thread Size And Series/type Designator And Location:
5/8-24 unef shielding err-100
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale,and the location.AYGB
Thread Size And Series/type Designator And Location:
14-1.25mm base err-100
MRC:
The average effective pressure rating for which the item is designed.AYGF
Mean Effective Pressure Rating:
Between 165.0 pounds per square inch and 185.0 pounds per square inch
Seat Major Diameter:
0.8125 inches
Height Above Mounting Surface:
2.781 inches
Top To Terminal Contact Distance:
1.000 inches
Top To Shield Thread Distance:
0.125 inches
Shield Thread Length:
0.375 inches
Barrel Inside Diameter:
0.468 inches
Terminal Sleeve Inside Diameter:
0.375 inches
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81348-ws506 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
2 type and a class
