Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Shaft is cold rolled in propeller taper area 9 ft 4-3/4 in. Lg starting 2 in. Forward of the after taper and extending 12 in. Beyond forward end of after sleeve
NSN
National Stock Number:
TXT
Description:
Ship Propulsion Shaft
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 3.500 inches and 7.000 inches
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
8.000 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.ABET
Thread Length:
7.625 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 2.375 inches and 2.438 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.481 feet
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
12.533 inches
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
1.959 feet
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.ABQB
Taper Major Diameter:
12.500 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
Between 1.500 inches and 1.562 inches
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.750 inches
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
1.000 inches
MRC:
The number of keyways contained in or on the item.AEVE
Keyway Quantity:
3 and 1
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Smooth machined
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.AKYN
Furnished Items And Quantity:
Propeller nut 1; propeller key, 2
MRC:
Indicates the type of unit.APQB
Unit Type:
Propeller shaft section
MRC:
Indicates the type of protective covering provided.APZX
Protective Covering Type:
Rubber
MRC:
The structural characteristic of the item.ARQS
Construction:
Hollow
MRC:
The number of threads per specific measurement scale.AZRW
Thread Quantity:
4 per inch
MRC:
Indicates the location at which the item is to be used.BPJZ
Usage Location:
Center
MRC:
The design of the forward end.CPHM
Forward End Design:
Tapered
MRC:
An indication of whether or not a forward end keyway is provided.CPJF
Forward End Keyway:
Provided
MRC:
An indication of whether or not an after end keyway is provided.CPJG
After End Keyway:
Provided
MRC:
A measurement of the longest dimension of the tapered portion of the forward end,in distinction from width.CPNC
Forward End Taper Length:
1.258 feet
MRC:
An indication of whether or not a threaded forward end is included.CPNF
Threaded Forward End:
Not included
MRC:
The design of the after end.CPTC
After End Design:
Tapered
MRC:
An indication of whether or not a threaded after end is included.CPTD
Threaded After End:
Included
MRC:
The length of a straight line which passes through the center of the forward bearing sleeve,and terminates at the outside circumference.CPTF
Forward Bearing Sleeve Outside Diameter:
13.625 inches
MRC:
A measurement of the longest dimension of the forward bearing sleeve,in distinction from width.CPTG
Forward Bearing Sleeve Length:
4.583 feet
MRC:
The length of a straight line which passes through the center of the after bearing sleeve,and terminates at the outside circumference.CPTH
After Bearing Sleeve Outside Diameter:
13.625 inches
MRC:
A measurement of the longest dimension of the after bearing sleeve,in distinction from width.CPTP
After Bearing Sleeve Length:
6.500 feet
MRC:
Indicates the location on an item to which a covering has been applied.CPTS
Covering Location:
Surfaces between bearing sleeves covered
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the forward end tapered portion,and terminates at the circumference.CPTT
Forward End Taper Major Diameter:
13.500 inches
MRC:
The amount of taper of the item.CTKF
Taper:
1.000 per foot in inches
MRC:
The amount of taper of the forward end of the item.CTMS
Forward End Taper:
0.125 per foot in inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, mil-s-890, forged
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, mil-s-890, forged
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
2
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
As differentiated by special, features
