Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Pin-rivet, threaded, tension
NSN
National Stock Number:
TXT
Description:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered and countersunk
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
Under Head Length:
Between 1.2675 inches and 1.2875 inches
First Step Diameter:
Between 0.3896 inches and 0.3901 inches
First Step Length:
Between 0.6825 inches and 0.6925 inches
Second Step Diameter:
Between 0.3640 inches and 0.3680 inches
Second Step Length:
0.590 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F/a-18 e/f
First End Taper Length:
0.030 inches
MRC:
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.CQSX
Shear Strength:
30000 double pounds per square inch
First End Taper Angle:
Between 0.215 degrees and 0.235 degrees
Pin Head Diameter:
Between 0.565 inches and 0.600 inches
First End Countersink Angle:
Between 90.0 degrees and 100.0 degrees
First End Countersink Diameter:
Between 0.197 inches and 0.217 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.130 inches and 0.140 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp xm-13
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5629 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
