Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Link, nato 2-3/16 dia.
NSN
National Stock Number:
TXT
Description:
End Chain Link
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Welded
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
Between 5.380 inches and 5.630 inches
MRC:
A measurement of the longest inside dimension of an item,in distinction from width.ADJU
Inside Length:
Between 13.750 inches and 14.250 inches
MRC:
The length of a straight line which passes through the center of the material,and terminates at the circumference.AJRB
Material Diameter:
Between 2.160 inches and 2.250 inches
MRC:
The measured load required to break the item in tension.BZQQ
Breaking Strength:
700000.0 pounds
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Material shall be grain size 7 or finer iaw astm e112 carburizing procedure
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a29 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Proof tested to 280, 000lbs
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Astm a153 and a143 assn standard single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Enlarged common
