Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Piston intake relief valve-5inch nst female swivel
NSN
National Stock Number:
TXT
Description:
Safety Relief Valve
MRC:
The part that controls the flow through the item.ADQU
Flow Control Device:
Piston
MRC:
Indicates the type of housing on the item that accommodates the stem packing or spring.ADSR
Bonnet Type:
Inside spring
MRC:
The means by which the bonnet is attached to the item.ADST
Bonnet Attachment Method:
Integral
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
8 1st end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
G62 beaded (hose) 2nd end
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Manual
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Round with holes 1st end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange 1st endunthreaded external hose 2nd end
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
280.0 pounds per square inch single response
MRC:
The predetermined pressure at which the item is calibrated to open.CSDC
Opening Pressure Setting:
750.0 pounds per square inch
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
10.000 inches 1st end
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
0.938 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.875 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT
Bolt Circle Diameter:
7.312 inches 1st end
MRC:
The design of the flange face.CWDF
Flange Face Design:
Plain 1st end
MRC:
The nominal length of a straight line which passes through the center of the accommodated hose,and terminates at the inside circumference.CWDW
Inside Diameter Hose Accommodated:
5.000 inches 2nd end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 356.0
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Water-oil-gas single response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Err-090
