Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Medium duty; screw head tilt w/calibrated protractor; coolant system, separate pump and motor; worklight; saw head forward stop; hydraulic variable speed
NSN
National Stock Number:
TXT
Description:
Metal Cutting Band Saw
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
60.0 hertz
MRC:
Indicates the type of frame included on the item.ALDF
Frame Type:
Tilt
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
220.0 volts
MRC:
The means by which the item is fed.AMWX
Feed Method:
Work into cutting band
MRC:
The speed at which an item has been tested and rated to perform without damage or failure of the rotating components,expressed in revolutions per minute.AMZE
Rotational Speed Rating In Rpm:
400.0
MRC:
An indication of the rated horsepower of the item.ANCY
Horsepower Rating:
5.000
MRC:
A measurement between specified points on the throat,in distinction from height.AQCL
Throat Depth:
16.000 inches
MRC:
An indication of whether or not a braking facility/ies/ is included.AQLX
Braking Facility:
Included
MRC:
The means by which the item is driven.ARCM
Drive Method:
Electric motor
MRC:
A measurement of the longest dimension of a table,in distinction from width.ARDQ
Table Length:
24.000 inches
MRC:
A measurement taken at right angles to the length of a table,in distinction from thickness.ARDR
Table Width:
24.000 inches
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
1
MRC:
Indicates the type of table provided.BNBB
Table Type:
Nontilting
MRC:
Indicates the type of band for which the item is designed.BWMC
Band Type For Which Designed:
Saw blade
MRC:
The maximum measurement of the longest dimension of the file the item will accommodate,in distinction from width.BWMD
File Maximum Length Accommodated:
120.000 inches
MRC:
The maximum measurement taken at right angles to the length of the file the item will accommodate,in distinction from thickness.BWMF
File Maximum Width Accommodated:
0.750 inches
MRC:
The maximum measurement of the longest dimension of the blade the item will accommodate,in distinction from width.BWMG
Blade Maximum Length Accommodated:
171.000 inches
MRC:
The maximum measurement taken at right angles to the length of the blade the item will accommodate,in distinction from thickness.BWMH
Blade Maximum Width Accommodated:
1.000 inches
MRC:
The left tilt angle of the frame,expressed in degrees.BWMK
Err Default:
Err default
MRC:
The left tilt angle of the frame,expressed in degrees.BWMK
Frame Left Tilt Angle In Deg:
45.0
MRC:
An indication of whether or not a vise is provided.BWML
Vise:
Not provided
MRC:
The distance between the guide and the table.BWMN
Distance Between Guide And Table:
10.000 inches
MRC:
The minimum and maximum limits of the cutting speed.BWMZ
Cutting Speed Range:
+50.0/+1500.0 feet per minute
MRC:
An indication of whether or not a power feed feature is provided.BWND
Power Feed Feature:
Provided
MRC:
An indication of whether or not a built-in coolant system is included.BWNG
Built-in Coolant System:
Not included
MRC:
An indication of whether or not an integral butt welder is included.BWNH
Integral Butt Welder:
Included
MRC:
An indication of whether or not an integral grinder is included.BWNJ
Integral Grinder:
Included
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
