Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Palladium contacts
NSN
National Stock Number:
TXT
Description:
Rotary Relay
MRC:
The ability of an item to withstand a specified torque load without fracture.AAPL
Torque Load Rating:
0.237 inch-ounces
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.844 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.937 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
1.312 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Hermetically sealed
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
Two no. 6-32 in. Mtg studs spaced 1.562 in. C to c
MRC:
The basic structure of the item.ALXF
Structural Design:
Sectional
MRC:
The operating current for which the item is rated.APAM
Operating Current Rating:
0.053 amperes
MRC:
The value/s/ of direct current potential which must be applied to the item for operation,expressed in volts.APBR
Dc Operating Voltage Rating In Volts:
48.000
MRC:
The specific number of contact terminals included.APNG
Contact Terminal Quantity:
18
MRC:
The specific number of coil terminals included.APNH
Coil Terminal Quantity:
2
MRC:
An indication of whether or not the reset facilities are provided.APNR
Reset Facility Feature:
Provided
MRC:
The amount of current required to activate the item.AXAZ
Pull-in Current:
0.028 amperes
MRC:
The amount of current required to maintain operation of the item.AXBA
Hold-in Current:
0.017 amperes
MRC:
The direction of rotation for which the item is designed.AYSY
Rotation Direction For Which Designed:
Clockwise
MRC:
The opposition that the coil offers to the flow of direct current.BDFT
Coil Dc Resistance:
900.000 ohms
MRC:
The number of sections included.BWGP
Section Quantity:
2
MRC:
The number of coil winding(s) provided.CPWL
Coil Winding Quantity:
1
MRC:
An indication of the characteristic(s) of a winding.CPWM
Winding Characteristic:
Single wound untapped
MRC:
The amount of direct current resistance required to activate the coil pull-in.CPWP
Coil Pull-in Dc Resistance Rating:
900.000 ohms
MRC:
The amount of direct current resistance required to maintain operation of the coil hold-in.CPWQ
Coil Hold-in Dc Resistance Rating:
900.000 ohms
MRC:
The measurement of the shaft rotation,expressed in degrees.CPWT
Shaft Rotation In Deg:
9.000
