Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Upright Drilling Machine
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
The rated power of the electric motor.ABYE
Electric Motor Power Rating:
0.500 horsepower
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
Indicates the type of head provided.AJGD
Head Type:
Sliding
MRC:
An indication of whether or not a treatment is included to produce a fungus resistant condition.AKSQ
Fungus Resistant Treatment:
Not included
MRC:
An indication of whether or not shielding against radio interference is provided.ALBH
Radio Interference Shielding:
Not provided
MRC:
An indication of whether or not a reversible rotation feature is included.ALYE
Rotation Reversibility Feature:
Not included
MRC:
Indicates the type of feed provided.AQDD
Feed Type:
Hand
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
0.500
MRC:
The number of spindles provided.BCRH
Spindle Quantity:
1
MRC:
Indicates the type of main drive provided for turning,rotating,or positioning the mechanism.BNQL
Main Drive Type:
Electric motor
MRC:
Designates the commercial taper size of the spindle socket.BNRK
Spindle Socket Taper Size:
No. 2 morse taped
MRC:
The distance the spindle will travel.BNRL
Spindle Travel Distance:
6.625 inches
MRC:
The drilling capability/ies/ of the item.BNRY
Drilling Capability:
1/2 in. In mild steel, 5/8 in. In cast iron
MRC:
Indicates the type of column provided on the item.BNRZ
Column Type:
Round
MRC:
The distance from the center of the spindle to the column.BNSD
Distance From Spindle Center To Column:
7.250 inches
MRC:
Indicates the type of base working surface provided on the item.BNSF
Base Working Surface Type:
Plain
MRC:
The physical configuration of the base working surface.BNSG
Base Working Surface Shape:
Round
MRC:
A measurement of the base working surface area on the item.BNSH
Base Working Surface Area:
Any acceptable
MRC:
The length of a straight line which passes through the center of the base working surface,and terminates at the circumference.BNSJ
Err Default:
Err default
MRC:
The length of a straight line which passes through the center of the base working surface,and terminates at the circumference.BNSJ
Base Working Surface Diameter:
10.500 inches
MRC:
The distance the base working surface can be adjusted vertically.BNSK
Err Default:
Err default
MRC:
The distance the base working surface can be adjusted vertically.BNSK
Base Working Surface Vertical Adjustment:
20.500 inches
MRC:
Indicates the location of the item on which the base working surface is mounted.BNSL
Base Working Surface Mounting Location:
Base
MRC:
The maximum distance from the chuck or spindle nose to the base working surface.BNSM
Maximum Distance From Chuck/spindle Nose To Base Working Surface:
36.000 inches
MRC:
Indicates the type of upper working surface provided on the item.BNSN
Upper Working Surface Type:
Plain w/angle bracket
MRC:
The physical configuration of the upper working surface.BNSP
Upper Working Surface Shape:
Square
MRC:
A measurement of the upper working surface area on the item.BNSQ
Upper Working Surface Area:
Any acceptable
MRC:
A measurement of the longest dimension of the upper working surface,in distinction from width.BNSS
Upper Working Surface Length:
11.000 inches
MRC:
A measurement taken at right angles to the length of the upper working surface,in distinction from thickness.BNST
Upper Working Surface Width:
11.000 inches
MRC:
An indication of whether or not an upper working surface adjustment feature is included.BNSW
Upper Working Surface Adjustment Feature:
Included
MRC:
The distance the upper working surface can be adjusted vertically.BNSX
Upper Working Surface Vertical Adjustment:
9.000 inches
MRC:
The swivel adjustment,expressed in degrees.BNSY
Swivel Adjustment In Deg:
360.000
MRC:
The direction and number of degrees in which the angle of tilt can be adjusted.BNSZ
Tilt Adjustment Direction And Angle In Deg:
90.0 left err-100 err-100
MRC:
The direction and number of degrees in which the angle of tilt can be adjusted.BNSZ
Tilt Adjustment Direction And Angle In Deg:
90.0 right err-100 err-100
MRC:
The measured distance the head can be adjusted vertically.BPSX
Head Vertical Adjustment:
5.000 inches
MRC:
Indicates the type of spindle provided.BQLR
Spindle Type:
Tapered socket
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
6
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+322.000/+3200.000
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+322.000 to 3200.000
MRC:
Indicates the location of the item on which the upper working surface is mounted.BWJN
Upper Working Surface Mounting Location:
Column
MRC:
The maximum distance from the chuck or spindle nose to the upper working surface.BWJP
Maximum Distance From Chuck/spindle Nose To Upper Working Surface:
12.000 inches
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
220.0
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
440.0
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
220.0 or 440.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.000
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
Bnsf, bnsg, bhsh, bnsj, bnsk, bnsl, bnsm, bnsn, bnsp, bnsq, bnss, bnst, bnsw, bnsy, bnsz, bwjn, bwjp, bnql, ashk, acdc, elec, freq, faaz, alye, albh, aksq
