change location
321-802-5889
321-733-7477
Model or part number: 80123
Fitting Tail Rotor Blade Bushing NSN 3120-01-562-1588.
NSN 3120-01-562-1588 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 4820-01-562-0023 | Safety Relief Valve |
| NSN 4730-01-562-0031 | Quick Disconnect Coupling Half |
| NSN 4820-01-562-0038 | Ball Valve |
| NSN 4730-01-562-0065 | Breeze Clamp |
| NSN 4730-01-562-0143 | Quick Disconnect Coupling Half |
| NSN 2940-01-562-0152 | Intake Air Cleane Filter Element |
| NSN 5930-01-562-0180 | Electronic Switch |
| NSN 6145-01-562-0199 | Electrical Power Cable |
| NSN 4820-01-562-0218 | Safety Relief Valve |
| NSN 2915-01-562-0233 | Fuel Manifold Valve |
| NSN 4930-01-562-0249 | Ground Expedie Pressure Assembly |
| NSN 4720-01-562-0509 | Nonmetallic Hose |
| NSN 4730-01-562-0518 | Quick Disconnect Coupling Half |
| NSN 4720-01-562-0526 | Nonmetallic Hose |
| NSN 4730-01-562-0543 | Quick Disconnect Coupling Half |
| NSN 4930-01-562-1338 | Fuel Bladder Assembly |
| NSN 5340-01-562-1373 | Center Ring |
| NSN 5331-01-562-1382 | O-ring |
| NSN 5305-01-562-1508 | Hexagon Head Cap Screw |
| NSN 3120-01-562-1588 | Sleeve Bushing |
| NSN 4930-01-562-1590 | Outer Shell |
| NSN 4930-01-562-1604 | Inner Liner |
| NSN 4030-01-562-1613 | Tank And Pump Unit Hoist Ring |
| NSN 5430-01-562-1620 | Fuel Storage Tank Vent Cap |
| NSN 5365-01-562-1631 | Machine Thread Plug |
| NSN 5325-01-562-1638 | Retaining Ring |
| NSN 5305-01-562-1645 | Machine Screw |
| NSN 4310-01-562-1652 | Reciprocating Compressor Unit |
| NSN 5340-01-562-1660 | Dust And Moistur Protective Plug |
| NSN 4930-01-562-3266 | Module Frame Enclosed |
| NSN 4820-01-562-3275 | Safety Relief Valve |
| NSN 4730-01-562-3282 | Pipe Coupling |
| NSN 4730-01-562-3340 | Vibration Isolator |
| NSN 4730-01-562-3380 | Quick Disconnect Coupling Half |
| NSN 4730-01-562-3394 | Quick Disconnect Coupling Half |
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes bushing, drill, jig.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Greaseproof-waterproof bag, sealed.
No requirement.
No requirement.
Parts, Nesoi, For Cylindrical Roller Bearings, Nesoi
Industrial Machines, Other
Parts Of Ball and Roller Bearings, N.e.s.
No special type of cargo code applicable.
Bearings.
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 80123 | 2 | ZZ | 4 | 03RJ8 |
| 80123 | 2 | ZZ | 5 | 74G10 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||