change location
321-802-5889
321-733-7477
Model or part number: 111-7944
Drain Tube NSN 4710-01-426-7699.
NSN 4710-01-426-7699 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 4140-01-425-5489 | Fan Impeller Guard |
| NSN 4140-01-425-5491 | Fan Impeller Guard |
| NSN 4730-01-426-2332 | Tube Fitting Compression Ferrule |
| NSN 4730-01-426-2335 | Tube-hose Fit Compression Sleeve |
| NSN 4730-01-426-2337 | Tube Coupling Inverted Nut |
| NSN 2910-01-426-2338 | Fluid Filter Element |
| NSN 4730-01-426-2342 | Sediment Strainer |
| NSN 4730-01-426-2343 | Tube Coupling Inverted Nut |
| NSN 4730-01-426-2346 | Tube To Hose Straight Adapter |
| NSN 4710-01-426-7699 | Metallic Bent Tube |
| NSN 4710-01-426-7705 | Metallic Bent Tube |
| NSN 4710-01-428-1687 | Metallic Bent Tube |
| NSN 4710-01-428-1688 | Metal Tube Assembly |
| NSN 4710-01-428-1689 | Metal Tube Assembly |
| NSN 4710-01-428-1692 | Metallic Tube |
| NSN 4720-01-429-9592 | Nonmetallic Hose |
| NSN 4720-01-431-6584 | Preformed Hose |
| NSN 2910-01-438-7423 | Fluid Filter |
| NSN 2990-01-453-4668 | Rubber Cap |
| NSN 4720-01-453-7270 | Nonmetallic Tubing |
| NSN 4720-01-453-7272 | Nonmetallic Tubing |
| NSN 4320-01-453-7474 | Hydraulic Motor Parts Kit |
| NSN 4820-01-453-7824 | Check Valve |
| NSN 2815-01-453-8074 | Cylinder Sleeve |
| NSN 2990-01-453-8155 | Engine Coolant Heater |
| NSN 4720-01-453-8170 | Nonmetallic Tubing |
| NSN 2940-01-453-8241 | Air Cleaner Intake Pipe Cap |
| NSN 2815-01-453-8295 | Exhaust Manifold |
| NSN 2920-01-453-8552 | Electrical Engine Starter |
| NSN 2815-01-453-8619 | Oil Pump Jet |
| NSN 5935-01-453-8887 | Electrical Plug Connector |
| NSN 2940-01-453-9515 | Intake Air Cleane Filter Element |
| NSN 2940-01-453-9526 | Intake Air Cleane Filter Element |
| NSN 2815-01-454-1334 | Engine Flywheel |
| NSN 5935-01-454-1390 | Electrical Plug Connector |
A bent hollow item, welded or seamless. It has a round, square or any other cross section, with a continuous periphery. It is primarily designed to convey fluids, gases and/or semisolids. Excludes items of circular cross section which conform in dimensional characteristics to pipe, metallic; elbow, pipe; elbow, tube; bend, electrical conduit; bend, pipe, return; and bend, tube, return. For items with end fittings on one or both ends, see tube assembly, metal.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Plug or seal all openings and preserve using method 20.
No requirement.
No special type of cargo code applicable.
Metal and metal products, nos, (less than 35 feet).
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 111-7944 | 2 | ZZ | 5 | 11083 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||