4720-01-464-0400

Nonmetallic Tubing email this page

Model or part number: AEM02022

Pricing & Availability

Submit this form for current pricing and availability of this NSN.

About this product
Maximum working pressure, re mrc cqgm 56.0 and burst pressure, re mrc cqbd psi at 73 deg fahrenheit, min bend radius 1.938, inside diameter 312 inches, outside diameter 0.438 inches, wall thickness 0.062 inches, ultimate elongation pct 500, tensile stress at 300 pct elonation psi 1550, brittle point deg f. Negative 100,tear resistance, lbf in 475, high temperature limit deg f. Intermittent 200.0, ection pct 68, tensile set at 75 pct elongation pct 98, abrasionresistance, mg lost 1,000 cycles equals

Description

Hose Protector Sleeve NSN 4720-01-464-0400. 7/16x5/16x0.125 tygo

NSN 4720-01-464-0400 Datasheet

MRC:

A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF

Nonmetallic Hardness Rating:

82.0 shore durometer a

MRC:

A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH

Tempurature Rating:

-100.0 degrees fahrenheit single response and 200.0 degrees fahrenheit single response

MRC:

The hue or tint of the exterior of the item.ADJS

Exterior Color:

Clear

MRC:

The national stock number or the identification information of the end equipment for which the item is a part.AGAV

End Application:

6115-01-435-1565; generator set, diesel engine; p/n 95-531

MRC:

The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC

Min. Tensile Strength (psi):

6050 pounds per square inch

MRC:

The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.CQBD

Burst Test Pressure:

180.0 pounds per square inch single response

MRC:

The maximum pressure at which the item is rated for operation.CQGM

Maximum Operating Pressure:

36.0 pounds per square inch single response

MRC:

The chemical compound or mechanical mixture properties of which the item is fabricated.MATT

Material:

Plastic polyurethane tube

MRC:

NIIN:

014640400

MRC:

NATO Stock Number:

4720-01-464-0400

MRC:

Shelf Life:

N/A

MRC:

UOM:

MRC:

DEMIL:

FIIG:

A54200

MRC:

INC:

31934

MRC:

IMM:

AX AX

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

End Items and Platforms

End items to which this NSN is a component of.

Diesel Engine; P/n 95-531 6115-01-435-1565; Generator Set

Parts and Components for Diesel Engine Generator Set NSN 6115-01-435-1565 Parts and components for this end application.

NSN	Component Description
NSN 5930-01-458-5607	Pressure Switch
NSN 6645-01-458-7278	Time Totalizing Meter
NSN 4720-01-464-0400	Nonmetallic Tubing
NSN 4720-01-464-0411	Nonmetallic Tubing
NSN 5905-01-465-3266	Voltage Sensitive Resistor
NSN 5310-01-467-2665	Wing Plain Nut
NSN 5310-01-467-3994	Slotted Washer
NSN 5330-01-467-3996	Gasket
NSN 5330-01-467-3998	Gasket
NSN 5975-01-467-6588	Electrical Conduit Bend
NSN 4330-01-467-6774	Filter Mounting Bracket
NSN 5940-01-467-8190	Lug Terminal
NSN 5940-01-467-8197	Lug Terminal
NSN 5940-01-467-8203	Lug Terminal
NSN 4330-01-468-5065	Filter Mounting Bracket
NSN 5365-01-479-1380	Nonmetallic Bushing
NSN 2940-01-501-9057	Fluid Filter Cover
NSN 2815-01-530-1270	Engine Poppet Valve Tappet
NSN 6115-01-593-7767	Generator Set Cover
NSN 6115-01-593-7771	Generator Set Cover

Formal Definition

Government issue definition of NSN 4720-01-464-0400

An item of varying tubular shapes molded or extruded from nonmetallic material. it includes flat form plastic tubing designed to be expanded for use and rubber tubing designed to be fabricated into sealing and/or cushioning devices. excludes hose, nonmetallic and tube (as modified).

Recent Solicitations Most recent solicitations for NSN 4720-01-464-0400

End Date

Solicitation

Qty

Purchase Request

End Date:

2018-11-19

Solicitation:

SPE7M419T1739

Qty:

Purchase Request:

0077029554

End Date:

2017-09-15

Solicitation:

SPE7M417T7508

Qty:

10989

Purchase Request:

0070579963

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

0.1000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

LVL C

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

LVL_C:

CUSH

MOP

CATEG.

PRES MAT

WRAP MAT

ICQ

THK

TOS

UCL

CUSH DUN:

MOP:

PKG:

46Z0

PRES MAT:

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) AE

Seal or plug all openings and preserve by method 10.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification

Schedule B Number

NAIC National Association of Insurance Commissioners

End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.

SITC Commodity classification system defined by the United Nations.

USDA

HITECH

Schedule B:

3917320000

NAICS:

326220

End Use Class:

12770

SITC:

58140

USDA:

HITECH:

Schedule B Codes Definitions:

Schedule B 3917320000

Tubes, Pipes & Hoses, Not Reinforced Or Otherwise Combined With Other Materials, W/o Fittings, Nesoi

End Use Code 12770

Other Industrial Supplies

Standard Intl. Trade Class (SITC) 58140

Tubes, Pipes and Hoses, N.e.s. Of Plastics, Not Reinforced Or Otherwise Combined With Other Materials, Without Fittings

Freight

Universal / National freight and handling information

NMFC

Class

UFC

LTL

LCL

WCC

TCC

SHC

ADC

ACC

NMFC:

051590

NMF Description:

Pipe/duct(air/smoke)d/elbows

UFC:

29650

LTL:

Rating variable

LCL:

WCC:

593

TCC:

SHC:

ADC:

ACC:

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 593

Motors and parts, (machinery and parts),(less than 35 feet).

Air Commodity (ACC) V

Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

DLA History / Forecast Quantities

Maritime Supply Chain

01/17	04/18	06/20
5987.00	6266.00	1428.00

Manufacturers

This NSN is registered to the following cage codes.

Cage 1DS07

Product Condition Codes

Code	Definition
FN	Factory New. Parts manufactured by the OEM and includes manufacturer certification.
NE	New. Parts manufactured by the OEM. May include manufacturer certification or company certification.
NS	New Surplus. New material item purchased from excess inventory.
OH	Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO).
SV	Serviceable product.
AR	As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part.
RP	Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification.

Cross Reference Parts

Part Number	RNVC	RNAAC	DAC	CAGE
AEM02022	2	ZZ	2	1DS07
AEM02022	2	ZZ	2	1DS07

Add to List select a list to add this NSN to

Name	No. Items
[You must be logged in to use lists]

Nevermind

4720-01-464-0400

Pricing & Availability

NSN 4720-01-464-0400 Datasheet

All Products Certified

Quality | ISO 9001:2015 + AS9120B

Shipping

End Items and Platforms

Parts and Components for Diesel Engine Generator Set NSN 6115-01-435-1565 Parts and components for this end application.

Formal Definition

Recent Solicitations Most recent solicitations for NSN 4720-01-464-0400

Packaging & Dimensions

Packaging Codes Definitions:

Import / Export

Schedule B Codes Definitions:

Freight

Freight Codes Definitions:

DLA History / Forecast Quantities

Manufacturers

Compare Now »