change location
321-802-5889
321-733-7477
Model or part number: 8623592
About this product
Steel,sae 12l14,aisi 1215,aisi 1215 w/tellurium or sae 1113; 4.316 in. Min 4.322 in. Max lg; 0.5610 in. Min 0.5615 in. Max dia one end; other end 0.5615 in. Min 0.5695 in. Max dia
Valve Directional Control NSN 4820-01-150-4964.
NSN 4820-01-150-4964 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 2590-00-476-5459 | Door Ventilator Stop |
| NSN 2910-00-493-2138 | Fuel Pump Plate |
| NSN 2540-01-086-5433 | Rearview Mirror Arm |
| NSN 2520-01-098-5200 | Steering Axle Parts Kit |
| NSN 2530-01-101-2929 | Vehicular Wheel Parts Kit |
| NSN 2520-01-146-5482 | Vehicular Hydraulic Transmission |
| NSN 5342-01-147-2266 | Parking Lock Bracket |
| NSN 2520-01-147-4005 | Vehicular Propeller Shaft |
| NSN 2815-01-147-4201 | Valve Lifter Guide Clamp |
| NSN 2910-01-147-4218 | Fuel Tank Strap Assembly |
| NSN 2910-01-147-4219 | Fuel Tank Shield Assembly |
| NSN 2590-01-147-4285 | Vehicular Components Filler Neck |
| NSN 2940-01-148-5992 | Intake Air Cleaner |
| NSN 2815-01-148-6966 | Vent Crankcase Baffle |
| NSN 2815-01-148-6971 | Engine Camshaft |
| NSN 3020-01-148-6983 | Cone Pulley |
| NSN 2815-01-148-9497 | Oil Pump And Screen Assembly |
| NSN 2815-01-148-9533 | Engine Poppet Valve Rocker Cover |
| NSN 2815-01-148-9534 | Internal Combu Timing Gear Cover |
| NSN 2815-01-148-9535 | Engine Crankshaft |
| NSN 4320-01-149-1866 | Liquid Pump Housing |
| NSN 5340-01-149-1867 | Access Cover |
| NSN 2520-01-149-7861 | Transmission Carrier Assembly |
| NSN 2910-01-150-0950 | Fuel Injection Nozzle |
| NSN 2530-01-150-3693 | Parking Brake Actuator Assembly |
| NSN 3040-01-150-3851 | Mechanical Drive Housing |
| NSN 4820-01-150-4964 | Directional Control Linear Valve |
| NSN 5935-01-150-6319 | Electrical Plug Connector |
| NSN 3040-01-151-5663 | Linear Actuating Cylinder Piston |
| NSN 2510-01-151-6363 | Leaf Spring Wear Plate |
| NSN 3040-01-151-7989 | Straight Shaft |
| NSN 6680-01-152-2845 | Liquid Level Gage Rod-cap |
| NSN 2540-01-153-9470 | Brake Pedal Assembly |
| NSN 5340-01-153-9471 | Brake Pedal Bracket |
| NSN 2530-01-153-9472 | Proportioning And Wa Brake Valve |
A manually or power operated valve having three or more ports. The direction of the flow through the various ports is controlled by either one or more reciprocating slide(s) or spool(s) with recess areas which mate with ports in an integral or replaceable ported sleeve, or one or more poppet(s). It is designed to change the direction of fluid flow from one valve port to another. An off (no flow) position is not a flow pattern. The valve is designed to actuate various components of a fluid system. A power operated valve may have a manual override. For items which stop, start, or change the flow of fluid, see: valve, solenoid. Excludes valve, plug. See also servovalve, hydraulic; body section, working, linear directional control valve; and valve assembly.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Seal or plug all openings and preserve by method 10.
No requirement.
Other Taps, Cocks, Valves, Etc., Nesoi
Industrial Machines, Other
Taps, Cocks, Valves and Similar Appliances, N.e.s.
No special type of cargo code applicable.
Metal and metal products, nos, (less than 35 feet).
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 8623592 | 2 | AX | A | 7X677 |
| 5740428 | 2 | ZZ | 6 | 34623 |
| 8623592 | 9 | AX | A | 11862 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||