Model or part number: LP526C1024R8
About this product
Nylon strip locking feature
Bolt Stove NSN 5305-01-543-2394.
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
NSN | Component Description |
---|---|
NSN 1325-00-009-9567 | Spring Centering Block |
NSN 1325-00-009-9568 | Spring Centering Clamp |
NSN 1325-00-009-9569 | Spring Centering Clamp |
NSN 1325-00-009-9599 | Control Section Housing |
NSN 5821-00-457-9710 | Radio Equipment Modification Kit |
NSN 6110-00-500-3376 | Motor Controller |
NSN 5975-00-844-7083 | Electrical Box Connector |
NSN 5895-01-003-6292 | Electrical Frequency Synthesizer |
NSN 4820-01-075-0072 | Valve |
NSN 5961-01-147-1676 | Transistor |
NSN 1325-01-193-3093 | Lanyard Adapter Kit |
NSN 5998-01-219-5166 | Circuit Card Assembly |
NSN 5998-01-220-2249 | Circuit Card Assembly |
NSN 1450-01-222-2596 | Adapter Assembly |
NSN 1325-01-226-1109 | Fuze Safing And Arming Pin |
NSN 5998-01-233-6801 | Circuit Card Assembly |
NSN 5998-01-255-9749 | Circuit Card Assembly |
NSN 5342-01-273-0865 | Wire Button End |
NSN 5340-01-307-5546 | Synchro Clamp |
NSN 2530-01-326-9200 | Steering Gear |
NSN 2540-01-326-9204 | Vehicle Window Regulator |
NSN 7610-01-340-0759 | Technical Manual |
NSN 7610-01-340-0760 | Technical Manual |
NSN 7610-01-340-0764 | Technical Manual |
NSN 7670-01-340-5346 | Microprint Edition |
NSN 7670-01-340-5347 | Microprint Edition |
NSN 7670-01-340-5348 | Microprint Edition |
NSN 2530-01-347-4748 | Steering Column Shaft |
NSN 2540-01-357-3581 | Vehicle Window Glas Lift Channel |
NSN 5998-01-359-1172 | Circuit Card Assembly |
NSN 5998-01-359-1173 | Circuit Card Assembly |
NSN 7050-01-359-1208 | Tape Recorder Crt Monitor |
NSN 7025-01-360-8541 | Disk Drive Unit |
NSN 2805-01-363-2357 | Oil Pan |
NSN 2920-01-363-7476 | Ignition Modulator Assembly |
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Physical protection.
No requirement.
No requirement.
Bolts and Bolts and Their Nuts Or Washers Exported In The Same Shipment
Iron and Steel Products, Other
Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Threaded, Of Iron Or Steel
No special type of cargo code applicable.
Bolts or nuts (iron or steel),(less than 35 feet).
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
Code | Definition |
---|---|
FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
NS | New Surplus. New material item purchased from excess inventory. |
OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
SV | Serviceable product. |
AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
Part Number | RNVC | RNAAC | DAC | CAGE |
---|---|---|---|---|
LP526C1024R8 | 2 | ZZ | 2 | 03038 |
LP526C1024R8 | 2 | ZZ | 2 | 16941 |
LP526C1024R8 | 2 | ZZ | 2 | 0DT23 |
LP526C1024R8 | 2 | ZF | 3 | F9901 |
Name | No. Items | |||
---|---|---|---|---|
[You must be logged in to use lists] |