change location
321-802-5889
321-733-7477
Model or part number: 643-6107-002
Printed Card Assembly NSN 5998-01-233-6801.
NSN 5998-01-233-6801 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 1325-00-009-9567 | Spring Centering Block |
| NSN 1325-00-009-9568 | Spring Centering Clamp |
| NSN 1325-00-009-9569 | Spring Centering Clamp |
| NSN 1325-00-009-9599 | Control Section Housing |
| NSN 5821-00-457-9710 | Radio Equipment Modification Kit |
| NSN 6110-00-500-3376 | Motor Controller |
| NSN 5975-00-844-7083 | Electrical Box Connector |
| NSN 5895-01-003-6292 | Electrical Frequency Synthesizer |
| NSN 4820-01-075-0072 | Valve |
| NSN 5961-01-147-1676 | Transistor |
| NSN 1325-01-193-3093 | Lanyard Adapter Kit |
| NSN 5998-01-219-5166 | Circuit Card Assembly |
| NSN 5998-01-220-2249 | Circuit Card Assembly |
| NSN 1450-01-222-2596 | Adapter Assembly |
| NSN 1325-01-226-1109 | Fuze Safing And Arming Pin |
| NSN 5998-01-233-6801 | Circuit Card Assembly |
| NSN 5998-01-255-9749 | Circuit Card Assembly |
| NSN 5342-01-273-0865 | Wire Button End |
| NSN 5340-01-307-5546 | Synchro Clamp |
| NSN 2530-01-326-9200 | Steering Gear |
| NSN 2540-01-326-9204 | Vehicle Window Regulator |
| NSN 7610-01-340-0759 | Technical Manual |
| NSN 7610-01-340-0760 | Technical Manual |
| NSN 7610-01-340-0764 | Technical Manual |
| NSN 7670-01-340-5346 | Microprint Edition |
| NSN 7670-01-340-5347 | Microprint Edition |
| NSN 7670-01-340-5348 | Microprint Edition |
| NSN 2530-01-347-4748 | Steering Column Shaft |
| NSN 2540-01-357-3581 | Vehicle Window Glas Lift Channel |
| NSN 5998-01-359-1172 | Circuit Card Assembly |
| NSN 5998-01-359-1173 | Circuit Card Assembly |
| NSN 7050-01-359-1208 | Tape Recorder Crt Monitor |
| NSN 7025-01-360-8541 | Disk Drive Unit |
| NSN 2805-01-363-2357 | Oil Pan |
| NSN 2920-01-363-7476 | Ignition Modulator Assembly |
A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. each component of the assemblage must be capable of functioning in accordance with its own item name. consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. it may also include printed electronic components. the item is generally part of a subassembly and cannot be assigned a more definite item name. for items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. for an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. excludes printed circuit boar
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing is not required. the unit container shall also serve as the shipping container. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Esd sensitive electronic device requirements of mil-std-129 apply.
Heated general purpose - heated 40 f and above.
Preserve by method 41 as follows: items subject to damage by electromagnetic and electrostatic field forces shall be initally wrapped in material conforming to mil-prf-81705, type iii, or bags conforming to mil-dtl-117, type ii, class h, style 2, or cushioned in material conforming to a-a-3129 or ppp-c-795, class 2 or ppp-c-1797, type ii, to prevent bag puncture, and unit packed in a heat-sealed bag conforming to mil-dtl-117, type i, class f, style 1. reclosable cushioned pouches conforming to mil-dtl-81997, type i or ii, may be used in lieu of initial wrap or cushioning. lead or terminal configurations for all items shall be maintained as manufactured without causing loads or stresses capable of causing damage to the item. materials used to maintain item position and lead or terminal configuration shall permit item removal without damage to the item. electrostatic discharge (esd) sensitive caution labels shall be applied in accordance with mil-std-129. connectors and plugs (power or data) shall be covered with conductive caps/plugs.
Ppp-c-795, class 2, anti-static cellular plastic film cushioning.
No requirement.
Electronic Integrated Circuits and Microassembly Parts
Semiconductors
Parts Of Electronic Integrated Circuits and Microassembles
No special type of cargo code applicable.
Electrical appliances, small.
Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 643-6107-002 | 2 | HD | 4 | 95105 |
| 643-6107-001 | 2 | HD | 4 | 95105 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||