5305-01-570-9399

Hexagon Head Cap Screw email this page

Images

Reference images of this national stock number
Reference of NSN 5305-01-570-9399

Model or part number: 92820A425

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Description

Tap Bolt NSN 5305-01-570-9399.

pdf NSN 5305-01-570-9399 Datasheet

MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
20.0 millimeters
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
20.0 millimeters
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon extended washer
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
7.0 millimeters
MRC:
None.AATB
Width Between Flats:
13.0 millimeters
MRC:
None.AATC
Extended Washer Diameter:
18.2 millimeters
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
4140-01-558-8059; cyclone blower, debris
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
8.0 millimeters
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
130500 pounds per square inch
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
27.0 rockwell c
MRC:
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.CQQR
Thread Pitch In Millimeters:
1.3
MRC:
The name assigned to the item by the government agency or commercial organization controlling the design of the item.CXCY
Product Name:
Cap screw
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
M
MRC:
--
NIIN:
015709399
MRC:
--
NATO Stock Number:
5305-01-570-9399
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
No
FIIG:
--
FIIG:
A003B0
MRC:
--
INC:
18257
MRC:
--
IMM:
KZ
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Parts and Components for Debris Blower NSN 4140-01-558-8059 Parts and components for this end application.

NSN Component Description
NSN 6150-01-570-7532 Conductor Bus
NSN 5340-01-570-7533 Loop Clamp
NSN 5340-01-570-7562 Webbing Strap
NSN 5306-01-570-7565 U Bolt
NSN 2910-01-570-7570 Engine Fuel Tank
NSN 5307-01-570-7573 Continuous Thread Stud
NSN 5310-01-570-7582 Flat Washer
NSN 5340-01-570-7595 Mounting Bracket
NSN 5315-01-570-7673 Headless Straight Pin
NSN 5307-01-570-7674 Plain Stud
NSN 2910-01-570-7677 Cam Actuated Fuel Pump
NSN 5330-01-570-7681 Gasket
NSN 2920-01-570-7684 Belt-chain Tens Adjusting Device
NSN 2920-01-570-7688 Electrical Engine Starter
NSN 5315-01-570-7754 Headed Straight Pin
NSN 5330-01-570-7809 Base Ring
NSN 5315-01-570-7822 Quick Release Pin
NSN 5305-01-570-7832 Hexagon Head Cap Screw
NSN 5305-01-570-7840 Machine Screw
NSN 5305-01-570-8460 Socket Head Cap Screw
NSN 6140-01-570-8865 Storage Battery
NSN 6150-01-570-8876 Wiring Harness
NSN 6150-01-570-8970 E Special Purpose Cable Assembly
NSN 4010-01-570-8990 Wire Rope Assembly Set
NSN 6150-01-570-9015 E Special Purpose Cable Assembly
NSN 5340-01-570-9363 Spring Tension Clip
NSN 5305-01-570-9391 Hexagon Head Cap Screw
NSN 5305-01-570-9399 Hexagon Head Cap Screw
NSN 9510-01-570-9402 Metal Bar
NSN 5305-01-570-9409 Hexagon Head Cap Screw
NSN 5340-01-570-9593 Permanent Magnet
NSN 5340-01-570-9604 Access Cover
NSN 5365-01-570-9608 Plate Spacer
NSN 2940-01-570-9632 Air Cleaner Cap Assembly
NSN 5340-01-570-9644 Webbing Strap

Formal Definition

Government issue definition of NSN 5305-01-570-9399

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

Recent Solicitations Most recent solicitations for NSN 5305-01-570-9399

End Date
Solicitation
Qty
Purchase Request
End Date:
2021-07-19
Solicitation:
SPE4A621T12HF
Qty:
92
Purchase Request:
0090260362
End Date:
2016-08-08
Solicitation:
SPE5E816TE953
Qty:
18
Purchase Request:
0064856364
End Date:
2016-06-27
Solicitation:
SPE5E816TC709
Qty:
18
Purchase Request:
0064257577

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
--
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
00
MOP:
10
PKG:
PRES MAT:
00
WRAP MAT:
00
ICQ:
AAA
THK:
0
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
7318152000
NAICS:
332722
End Use Class:
12110
SITC:
69421
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 7318152000

Bolts and Bolts and Their Nuts Or Washers Exported In The Same Shipment

End Use Code 12110

Iron and Steel Products, Other

Standard Intl. Trade Class (SITC) 69421

Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Threaded, Of Iron Or Steel

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
096640
NMF Description:
Iron Or Steel Screws
UFC:
50600
LTL:
70.0
LCL:
--
WCC:
573
TCC:
Z
SHC:
9
ADC:
A
ACC:
B

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 573

Bolts or nuts (iron or steel),(less than 35 feet).

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide