5305-01-597-6123

Hexagon Head Cap Screw email this page

Images

Reference images of this national stock number
Reference of NSN 5305-01-597-6123 Reference of NSN 5305-01-597-6123

Model or part number: 90854A270

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Description

Tap Bolt NSN 5305-01-597-6123.

pdf NSN 5305-01-597-6123 Datasheet

MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
30.0 millimeters
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
30.0 millimeters
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
10.0 millimeters
MRC:
None.AATB
Width Between Flats:
24.0 millimeters
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2355-01-552-5199 mine resistant vehicle
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
16.0 millimeters
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
150000 pounds per square inch
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
32.0 rockwell c and 39.0 rockwell c
MRC:
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.CQQR
Thread Pitch In Millimeters:
2.0
MRC:
A numeric-alpha designator indicating established pitch and crest diameter tolerance positions and grades of an external thread.CQWR
External Thread Tolerance Class:
6g
MRC:
The name assigned to the item by the government agency or commercial organization controlling the design of the item.CXCY
Product Name:
Cap screw, hex head
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel property class 10.9
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
M
MRC:
--
NIIN:
015976123
MRC:
--
NATO Stock Number:
5305-01-597-6123
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
No
FIIG:
--
FIIG:
A003B0
MRC:
--
INC:
18257
MRC:
--
IMM:
KZ
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Parts and Components for Mine Resistant Vehicle NSN 2355-01-552-5199 Parts and components for this end application.

NSN Component Description
NSN 2540-01-568-4016 Vehicular Seat
NSN 2530-01-578-0352 Lh Steering Arm
NSN 5310-01-578-0989 Flat Washer
NSN 2520-01-578-3164 Vehicular Sliding Sleeve Clutch
NSN 2520-01-578-3244 Transmission Cover Assembly
NSN 5930-01-578-3362 Push Button
NSN 9150-01-579-3508 Vacuum Pump Lubricating Oil
NSN 5305-01-579-3530 Hexagon Head Cap Screw
NSN 5305-01-582-0227 Self-drilling Screw
NSN 5310-01-582-1253 Hexagon Self-locking Nut
NSN 5310-01-582-1278 Clip-on Nut
NSN 5305-01-582-1299 Self-drilling Screw
NSN 5305-01-582-1346 Machine Screw
NSN 5305-01-582-1359 Socket Head Cap Screw
NSN 5305-01-582-1380 Hexagon Head Cap Screw
NSN 5305-01-582-1396 Shoulder Screw
NSN 5305-01-582-1430 Socket Head Cap Screw
NSN 5305-01-582-1446 Hexagon Head Cap Screw
NSN 5315-01-582-1460 Lock Pin
NSN 4010-01-586-4022 Wire Rope
NSN 4730-01-586-4075 Quick Disconnect Coupling Half
NSN 4720-01-590-4785 Nonmetallic Hose Assembly
NSN 4810-01-590-4821 Manifold Valve Assembly
NSN 4720-01-590-4904 Nonmetallic Hose Assembly
NSN 5920-01-590-4921 Block Fuseholder
NSN 5310-01-597-5723 Hexagon Self-locking Nut
NSN 5310-01-597-5726 Extended Washer Self-locking Nut
NSN 4820-01-597-5885 Check Valve
NSN 5310-01-597-6110 Lock Washer
NSN 5305-01-597-6113 Hexagon Head Cap Screw
NSN 5305-01-597-6116 Socket Head Cap Screw
NSN 5310-01-597-6118 Flat Washer
NSN 5305-01-597-6123 Hexagon Head Cap Screw
NSN 5315-01-597-6125 Cotter Pin
NSN 2930-01-598-0268 Engine Fan Clutch

Formal Definition

Government issue definition of NSN 5305-01-597-6123

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

Recent Solicitations Most recent solicitations for NSN 5305-01-597-6123

End Date
Solicitation
Qty
Purchase Request
End Date:
2019-02-07
Solicitation:
SPE5E819T5755
Qty:
140
Purchase Request:
0078114224
End Date:
2015-08-17
Solicitation:
SPE5E215TF559
Qty:
1
Purchase Request:
0059755130

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
--
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
00
MOP:
10
PKG:
PRES MAT:
00
WRAP MAT:
00
ICQ:
AAA
THK:
0
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
7318152000
NAICS:
332722
End Use Class:
12110
SITC:
69421
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 7318152000

Bolts and Bolts and Their Nuts Or Washers Exported In The Same Shipment

End Use Code 12110

Iron and Steel Products, Other

Standard Intl. Trade Class (SITC) 69421

Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Threaded, Of Iron Or Steel

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
096640
NMF Description:
Iron Or Steel Screws
UFC:
50600
LTL:
70.0
LCL:
--
WCC:
573
TCC:
Z
SHC:
9
ADC:
A
ACC:
B

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 573

Bolts or nuts (iron or steel),(less than 35 feet).

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide