5306-01-466-4476

Square Neck Bolt email this page

Images

Reference images of this national stock number
Reference of NSN 5306-01-466-4476

Model or part number: MS16207-8

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Description

Freight Car Flush Head Bolt NSN 5306-01-466-4476.

pdf NSN 5306-01-466-4476 Datasheet

MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.750 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 2.219 inches and 2.281 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Button
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.563 inches and 0.594 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.125 inches and 0.145 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
5895-01-435-0571
MRC:
A measurement of the longest dimension of the neck,in distinction from width.AGQB
Neck Length:
Between 0.125 inches and 0.156 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.250 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
60000 pounds per square inch
MRC:
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.CQHQ
Minimum Yield Strength:
40000 pounds per square inch
MRC:
A measurement taken at right angles to the length of the neck,in distinction from thickness.CWXQ
Neck Width:
Between 0.245 inches and 0.260 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 651
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-c-591 federal specification single material response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
MRC:
--
NIIN:
014664476
MRC:
--
NATO Stock Number:
5306-01-466-4476
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
No
FIIG:
--
FIIG:
A003B0
MRC:
--
INC:
15939
MRC:
--
IMM:
KZ
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Parts and Components for Satellite Communication Terminal NSN 5895-01-435-0571 Parts and components for this end application.

NSN Component Description
NSN 5306-01-466-4476 Square Neck Bolt
NSN 5305-01-466-4849 Machine Screw
NSN 5915-01-466-5794 Radio Frequency Interfere Filter
NSN 5935-01-466-7530 Electrical Connector Cover
NSN 6645-01-466-9477 Interval Timer
NSN 6605-01-467-0345 Unmounted Magnetic Compass
NSN 5910-01-467-0658 Electrolytic Fixed Capacitor
NSN 5915-01-467-0735 Radio Frequency Interfere Filter
NSN 5305-01-467-1462 Socket Head Cap Screw
NSN 5895-01-467-2060 Electronic Communication E Cover
NSN 5895-01-467-2061 Electronic Communication E Cover
NSN 5305-01-467-2402 Panel Fastener Screw
NSN 6680-01-467-2729 Liquid Level Switch Float
NSN 5925-01-467-3625 Circuit Breaker
NSN 5306-01-468-2740 Machine Bolt
NSN 5330-01-468-9855 Gasket
NSN 5330-01-468-9859 Gasket
NSN 5330-01-468-9902 Gasket
NSN 5998-01-469-0364 Circuit Card Assembly
NSN 3040-01-469-0596 Nonaircraft Mechanical Actuator
NSN 5930-01-469-1532 Switch Guard
NSN 5865-01-469-1594 Defense Satellite Communications
NSN 5310-01-469-1600 Flat Washer
NSN 5895-01-469-1832 Satellite Communication Terminal
NSN 5340-01-469-2214 Access Cover
NSN 5340-01-469-2502 Loop Clamp
NSN 5998-01-469-2516 Circuit Card Assembly
NSN 5935-01-469-2567 Electrical Connector Backshell
NSN 5935-01-469-2575 Electrical Connector Backshell
NSN 5935-01-469-2585 Electrical Connector Backshell
NSN 5935-01-469-2633 Electrical Connector Backshell
NSN 5935-01-469-2640 Electrical Connector Backshell
NSN 5935-01-469-2647 Electrical Connector Backshell
NSN 5935-01-469-2653 Electrical Connector Backshell
NSN 5310-01-469-3090 Hexagon Plain Nut

Formal Definition

Government issue definition of NSN 5306-01-466-4476

A headed externally threaded fastener whose threaded portion is of one nominal diameter, with a square neck directly beneath the head.

Recent Solicitations Most recent solicitations for NSN 5306-01-466-4476

End Date
Solicitation
Qty
Purchase Request
End Date:
2015-10-26
Solicitation:
SPE5E016T0075
Qty:
1
Purchase Request:
0060799387
End Date:
2015-06-08
Solicitation:
SPE5E415TA038
Qty:
1
Purchase Request:
0058710488

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
--
Paclk Weight:
--
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
00
MOP:
10
PKG:
PRES MAT:
00
WRAP MAT:
00
ICQ:
AAA
THK:
0
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 10

Physical protection.

Cushion Material (CUSH) 00

No requirement.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
7415338550
NAICS:
332722
End Use Class:
12300
SITC:
69433
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 7415338550

Other Copper Screws (not For Wood) Bolts and Nuts

End Use Code 12300

Finished Metal Shapes

Standard Intl. Trade Class (SITC) 69433

Screws, Bolts, Nuts, Washers and Similar Articles, Threaded, Of Copper

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
093486
NMF Description:
Noi (sub 3) Nuts Or Screws Bolts
UFC:
48950
LTL:
Rating variable
LCL:
--
WCC:
574
TCC:
Z
SHC:
9
ADC:
A
ACC:
B

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 574

Iron or steel, structural, (less than 35 feet)(see 825).

Air Commodity (ACC) B

Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide