change location
321-802-5889
321-733-7477
Model or part number: 922022 17.3MM
Riveting Burr NSN 5310-01-344-5943.
NSN 5310-01-344-5943 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 4720-01-344-0699 | Nonmetallic Hose |
| NSN 2540-01-344-1817 | Automotive Stoplight Switch |
| NSN 2530-01-344-1835 | Brake Disc |
| NSN 3040-01-344-1853 | Manual Control Lever |
| NSN 3020-01-344-1859 | Mechanical Drive Guard |
| NSN 2940-01-344-1877 | Intake Air Cleane Filter Element |
| NSN 2990-01-344-1952 | Exhaust-intake Muffler |
| NSN 2530-01-344-1997 | Pneumatic Tire Wheel |
| NSN 2530-01-344-1998 | Pneumatic Tire Wheel |
| NSN 2530-01-344-2830 | Motorcycle Fork Assembly |
| NSN 2910-01-344-5348 | Engine Fuel Tank |
| NSN 2805-01-344-5350 | Gasoline Engine |
| NSN 2530-01-344-5744 | Disk Brake Shoe |
| NSN 3020-01-344-5898 | Sprocket Wheel |
| NSN 5310-01-344-5927 | Hexagon Castellated Plain Nut |
| NSN 5310-01-344-5928 | Hexagon Castellated Plain Nut |
| NSN 5310-01-344-5943 | Flat Washer |
| NSN 2920-01-345-0676 | Spark Plug |
| NSN 2530-01-345-2200 | Wheel Spoke |
| NSN 6220-01-345-2789 | Vehicular Stop Light-taillight |
| NSN 6220-01-345-2791 | Headlight |
| NSN 3040-01-345-3987 | Manual Control Lever |
| NSN 2510-01-345-4045 | Vehicular Fender |
| NSN 6220-01-346-1285 | Clearance Marker Light |
| NSN 6350-01-346-8292 | Signal Horn |
| NSN 2920-01-346-9856 | Belt-chain Tens Adjusting Device |
| NSN 2940-01-349-2115 | Fluid Filter Element |
| NSN 2530-01-349-4766 | Vehic Cable And Conduit Assembly |
| NSN 3020-01-349-7956 | Groove Pulley |
| NSN 3020-01-350-0229 | Spur Gear |
| NSN 3020-01-350-0230 | Spur Gear |
| NSN 2510-01-350-1144 | Vehicular Operation Panel |
| NSN 3040-01-350-3836 | Shouldered Shaft |
| NSN 2805-01-350-5031 | Cylinder Sleeve |
| NSN 6685-01-350-5838 | Flow Control Thermostat |
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Physical protection.
No requirement.
No requirement.
No special type of cargo code applicable.
Metal and metal products, nos, (less than 35 feet).
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 922022 17.3MM | 1 | KZ | 5 | 1N651 |
| 42046-009 | 2 | KZ | E | 1N651 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||