change location
321-802-5889
321-733-7477
Model or part number: 890.83.02
Riveting Burr NSN 5310-01-485-7847.
NSN 5310-01-485-7847 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 5331-01-474-3675 | O-ring |
| NSN 4730-01-485-7483 | Hose Elbow |
| NSN 5340-01-485-7585 | Dust And Moisture Protective Cap |
| NSN 4730-01-485-7592 | Pipe Union |
| NSN 5340-01-485-7595 | Dust And Moi Protective Cap-plug |
| NSN 5305-01-485-7603 | Hexagon Head Cap Screw |
| NSN 5340-01-485-7657 | Loop Clamp |
| NSN 5330-01-485-7836 | Gasket |
| NSN 5310-01-485-7840 | Lock Washer |
| NSN 5310-01-485-7847 | Flat Washer |
| NSN 4720-01-485-7853 | Nonmetallic Hose |
| NSN 4730-01-485-7868 | Hose Clamp |
| NSN 5331-01-485-7871 | O-ring |
| NSN 4320-01-485-8112 | Centrifugal Pump Impeller |
| NSN 4730-01-485-8115 | Sediment Strainer Element |
| NSN 4320-01-485-8120 | Centrifugal Pump |
| NSN 4320-01-485-8122 | Centrifugal Pump Subassembly |
| NSN 4820-01-485-8124 | Diaphragm Replacement Parts Kit |
| NSN 4820-01-485-8133 | Valve Assembly |
| NSN 4720-01-485-8278 | Nonmetallic Hose |
| NSN 4730-01-485-8280 | Hose Elbow |
| NSN 4610-01-485-8287 | Water Puri Hypochlorination Unit |
| NSN 5340-01-485-8288 | Manual Control Handle |
| NSN 5310-01-485-8292 | Hexagon Cone Seat Plain Nut |
| NSN 5330-01-485-8362 | Mecha Seal Replacement Parts Kit |
| NSN 4730-01-485-8364 | Quick Disconnect Coupling Half |
| NSN 4820-01-485-8369 | Fluid Pressure Regulating Valve |
| NSN 4730-01-485-8371 | Quick Disconnect Coupling Half |
| NSN 4730-01-485-8372 | Pipe Tee |
| NSN 5310-01-485-8375 | Hexagon Cone Seat Plain Nut |
| NSN 4730-01-485-8378 | Hose Elbow |
| NSN 4730-01-485-8381 | Tube Coupling Nut |
| NSN 5310-01-485-8382 | Hexagon Cone Seat Plain Nut |
| NSN 5310-01-485-8385 | Hexagon Cone Seat Plain Nut |
| NSN 4820-01-485-8390 | Fluid Pressure Regulating Valve |
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Physical protection.
No requirement.
No requirement.
Washers Other Than Lock Washers, Iron Or Steel
Finished Metal Shapes
Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Not Threaded, Of Iron Or Steel
No special type of cargo code applicable.
Metal and metal products, nos, (less than 35 feet).
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 890.83.02 | 9 | ZZ | 4 | 0FHH9 |
| 890.83.02 | 2 | ZZ | 5 | D8889 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||