change location
321-802-5889
321-733-7477
Model or part number: 8379192
This product is available in the following quantities and conditions.
Total: 4 Note: Availability of this item was last updated 10/08/2024, and may have changed since then. Request a quote for up to date pricing and availability.
About this product
Consist of lock,machine gun pintle stand,cage 19207 p/n 8379192; length 4.312 inch,width 1.500 inch; material,steel forging c 1045 thru c 1050 spec mil-s-13048,waive mech. Properties paragraph quench and temperto bhn 223-235
Operating Lever NSN 5340-00-816-6512.
NSN 5340-00-816-6512 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 5310-00-721-7809 | Lock Washer |
| NSN 5340-00-816-6512 | Manual Control Lever |
| NSN 8145-01-100-6276 | E Shipping And Storage Container |
| NSN 2815-01-105-6445 | Diesel Engine Block Assembly |
| NSN 5340-01-105-6450 | Expansion Plug |
| NSN 3130-01-105-6594 | Pillow Block Cap |
| NSN 3040-01-105-6597 | Remote Control Lever |
| NSN 2510-01-105-6633 | Vehicle Hatch Door |
| NSN 2590-01-105-6636 | Branched Wiring Harness |
| NSN 5330-01-105-8696 | Packing Retainer |
| NSN 5325-01-106-6515 | Retaining Ring |
| NSN 5340-01-106-6544 | Mounting Bracket |
| NSN 5365-01-106-6578 | Shim |
| NSN 7690-01-106-6625 | Identification Marker |
| NSN 2815-01-106-7798 | Engine Vibration Dampener |
| NSN 3010-01-106-7799 | Shaft Coupling Half |
| NSN 3010-01-106-7802 | Shaft Coupling Half |
| NSN 5340-01-106-7829 | Dust And Moistur Protective Plug |
| NSN 5975-01-106-7836 | Electrical Equipment Drawer |
| NSN 2590-01-106-7847 | Blackout Frame |
| NSN 3120-01-106-8060 | Sleeve Bearing Set |
| NSN 3040-01-106-8062 | Rigid Connecting Link |
| NSN 3040-01-106-8063 | Rigid Connecting Link |
| NSN 7690-01-106-8090 | Identification Marker |
| NSN 2540-01-106-9747 | Vehicular Seat Support |
| NSN 1005-01-106-9749 | Seat Track |
| NSN 2510-01-107-3182 | Vehicle Hatch Door |
| NSN 3040-01-107-3183 | Nonrotating Shaft Eye Bracket |
| NSN 3130-01-107-3184 | Pillow Block Cap |
| NSN 5340-01-107-3186 | Access Cover |
| NSN 5340-01-107-3187 | Access Cover |
| NSN 5340-01-107-3194 | Mounting Bracket |
| NSN 4730-01-107-3202 | Fuel Adapter Plate |
| NSN 2540-01-107-3225 | Vehicular Seat Frame |
| NSN 5340-01-107-3231 | Mounting Bracket |
A rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of connecting link, rigid; wire rope assembly, single leg; and clevis, rod end; etc.. Excludes arm (as modified); lever, remote control; and bell crank.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Unheated general purpose.
Physical protection.
No requirement.
No requirement.
Other Mountings, Fittings and Similar Articles (except Hinges) Suitable For Motor Vehicles; and Parts Thereof, All Of Base Metal
Other Parts and Accessories Of Vehicles
Mountings, Fittings and Similar Articles For Motor Vehicles, N.e.s., Of Base Metal
No special type of cargo code applicable.
Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc.
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| 10/15 | 08/16 | 07/17 | 02/18 |
|---|---|---|---|
| 25.00 | 25.00 | 25.00 | 29.00 |
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 8379192 | 2 | AZ | 2 | 19207 |
| 8379192 | 9 | AZ | 2 | 19200 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||