change location
321-802-5889
321-733-7477
Model or part number: 672-0788-010
Magpot NSN 5950-01-465-7126.
NSN 5950-01-465-7126 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 4710-01-414-9306 | Metal Tube Assembly |
| NSN 4820-01-414-9315 | Check Valve |
| NSN 1660-01-434-3845 | Flat Valve Diaphragm |
| NSN 1660-01-434-3853 | Valve Disk |
| NSN 3040-01-436-4750 | Straight Shaft |
| NSN 3040-01-436-4951 | Straight Shaft |
| NSN 3040-01-436-5796 | Shaft Collar |
| NSN 3040-01-437-2797 | Rigid Connecting Link |
| NSN 5905-01-437-3182 | Film Fixed Resistor Network |
| NSN 5985-01-438-9550 | Waveguide Seal |
| NSN 4720-01-439-8948 | Nonmetallic Hose Assembly |
| NSN 4730-01-440-2141 | Tube Assembly Fitting |
| NSN 5985-01-440-6673 | Waveguide Adapter |
| NSN 1650-01-442-0336 | Snubber Assy Cap |
| NSN 5935-01-442-1525 | Electrical Receptacle Connector |
| NSN 3040-01-443-6488 | Sill Protector |
| NSN 5930-01-449-0034 | Push Button |
| NSN 4320-01-452-8353 | Hand Driven Hydraulic Ram Pump |
| NSN 3120-01-454-8648 | Sleeve Bushing |
| NSN 3120-01-454-8650 | Sleeve Bushing |
| NSN 3120-01-454-8652 | Sleeve Bushing |
| NSN 3120-01-454-8673 | Sleeve Bushing |
| NSN 1650-01-457-5012 | Lin Transducer Assy |
| NSN 4820-01-457-7860 | Hyd Relief Valve |
| NSN 1560-01-461-3968 | Aircraft Stiffener |
| NSN 1560-01-461-7224 | Air Structural Component Fitting |
| NSN 5905-01-463-4511 | Induct Wire Wound Fixed Resistor |
| NSN 5985-01-463-7225 | Electrical Dummy Load |
| NSN 5935-01-464-0023 | Plug-in Electronic Compon Socket |
| NSN 5945-01-464-0025 | Retaining Clip |
| NSN 5945-01-464-0029 | Electromagnetic Relay |
| NSN 5945-01-464-8414 | Electromagnetic Relay |
| NSN 5945-01-464-8424 | Electromagnetic Relay |
| NSN 5935-01-465-0202 | Electrical Plug Connector |
| NSN 5935-01-465-0672 | Electrical Connector Backshell |
A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes transformer (1), pulse.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Watervaporproof bag, sealed.
Astm-d4727, domestic fiberboard used as pads, cells, die cuts or sleeves.
No requirement.
No special type of cargo code applicable.
Transformer, (machinery and parts),(less than 35 feet).
Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| 09/16 | 04/17 | 06/19 | 11/19 | 04/20 |
|---|---|---|---|---|
| 10.00 | 9.00 | 4.00 | 4.00 | 2.00 |
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 672-0788-010 | 2 | ZZ | 5 | 13499 |
| 280370 | 2 | ZZ | 5 | 85374 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||