5998-00-081-0769

Circuit Card Assembly email this page
ITAR Registered

Model or part number: 10244284

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards

About this product
Resistor 30;transistor 6;capacitor 22;printed wiring board 1

Description

Printed Card Assembly NSN 5998-00-081-0769.

pdf NSN 5998-00-081-0769 Datasheet

MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.860 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.667 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.600 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
1430-880-3357
MRC:
--
NIIN:
000810769
MRC:
--
NATO Stock Number:
5998-00-081-0769
MRC:
--
Shelf Life:
N/A
MRC:
--
UOM:
--
MRC:
--
DEMIL:
FIIG:
--
FIIG:
A511K0
MRC:
--
INC:
61638
MRC:
--
IMM:
TX
Certified products icon

All Products Certified

Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.

Quality inspections icon

Quality | ISO 9001:2015 + AS9120B

We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC, ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.

Quality Commitment »

Shipping icon

Shipping

Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.

Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.

Parts and Components for G Radar Signal Simulator Station NSN 1430-00-880-3357 Parts and components for this end application.

NSN Component Description
NSN 5970-00-010-0333 Electrical Insulation Sleeving
NSN 1430-00-031-7725 Generator Assembly
NSN 5998-00-081-0769 Circuit Card Assembly
NSN 1430-00-099-5756 Voltage Control Oscillator
NSN 3020-00-186-4984 Spur Gear
NSN 4935-00-415-1508 Logic Annuncia Gate
NSN 5998-00-416-8033 Electronic Components Assembly
NSN 1430-00-482-5996 Transformer-connect
NSN 1430-00-482-6001 Time Delay Assembly
NSN 4935-00-482-6019 Decade Counter-driv
NSN 4935-00-482-6022 Divider-multiplier
NSN 4935-00-482-6023 Amplifier-attenuato
NSN 3020-00-968-4494 Bevel Gear
NSN 1290-01-016-9209 Fire Control Eq Modification Kit
NSN 1290-01-046-0053 Fire Control Eq Modification Kit
NSN 1290-01-046-0054 Fire Control Eq Modification Kit
NSN 1290-01-046-0055 Fire Control Eq Modification Kit
NSN 1290-01-046-0056 Fire Control Eq Modification Kit
NSN 1290-01-047-0663 Fire Control Eq Modification Kit
NSN 1290-01-073-1709 Fire Control Eq Modification Kit
NSN 1290-01-082-7873 Fire Control Eq Modification Kit
NSN 1290-01-082-7874 Fire Control Eq Modification Kit
NSN 1290-01-088-2971 Fire Control Eq Modification Kit
NSN 1430-01-094-4840 Amplifier
NSN 1290-01-107-0992 Fire Control Eq Modification Kit
NSN 1290-01-118-0997 Fire Control Eq Modification Kit

Formal Definition

Government issue definition of NSN 5998-00-081-0769

A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. each component of the assemblage must be capable of functioning in accordance with its own item name. consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. it may also include printed electronic components. the item is generally part of a subassembly and cannot be assigned a more definite item name. for items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. for an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. excludes printed circuit boar

Packaging & Dimensions

MIL-STD codes: http://www.dla.mil/LandandMaritime/.../MILSTD2073Codes.aspx
Est. Pack Size
Est. Pack Weight
Est. Item Weight
Est. Item Dim.
Pack Size:
5.0 X 5.0 X 2.0
Paclk Weight:
3.0000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
E
LVL_B:
Q
LVL_C:
U
CUSH
MOP
CATEG.
PRES MAT
WRAP MAT
ICQ
THK
TOS
UCL
CUSH DUN:
NA
MOP:
41
PKG:
69F0
PRES MAT:
00
WRAP MAT:
00
ICQ:
AAA
THK:
X
TOS:
UCL:

Packaging Codes Definitions:

LVL A Code (LVL_A) E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

LVL C Code (LVL_C) U

Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

Method of Preservation (MOP) 41

Watervaporproof bag, sealed.

Cushion Material (CUSH) NA

Ppp-c-795, cellular plastic film cushioning; or a-a-3129, open cell plastic cushioning; or ppp-c-1797, polypropylene foam cushioning; or a-a-59136, polyethylene foam cushioning.

Preservation Material (PRES_MAT) 00

No requirement.

Import / Export

Schedule B Classification
Schedule B Number
NAIC National Association of Insurance Commissioners
End Use A classification system for U.S. exported and imported merchandise based on principal use rather than the physical characteristics of the merchandise. End-Use codes are assigned by the Bureau of Economic Analysis under the U.S. Department of Commerce.
SITC Commodity classification system defined by the United Nations.
USDA
HITECH
Schedule B:
8542900000
NAICS:
334413
End Use Class:
21320
SITC:
77689
USDA:
1
HITECH:
5

Schedule B Codes Definitions:

Schedule B 8542900000

Electronic Integrated Circuits and Microassembly Parts

End Use Code 21320

Semiconductors

Standard Intl. Trade Class (SITC) 77689

Parts Of Electronic Integrated Circuits and Microassembles

Freight

Universal / National freight and handling information
NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
063025
NMF Description:
Semiconductors/devices Noi Etc Sub1
UFC:
34525
LTL:
100.0
LCL:
100.0
WCC:
658
TCC:
Z
SHC:
9
ADC:
A
ACC:
H

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 658

Electrical appliances, small.

Air Commodity (ACC) H

Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)

Manufacturers

This NSN is registered to the following cage codes.
Compare Now »
Clear | Hide