change location
321-802-5889
321-733-7477
Model or part number: 11829321
About this product
Soldering and cleaning per mil-std-454 reqt 5 conformal coat using findno 16 otherwise;construct and inspect printed wiring assy in accordance withmil-p-28809 type 2;apply serial numberand revision level using approx .12 high white characters per mil-std-130 byrubber stamp locate approx as shown prior to conformal coating;qap 11829321 applies to this drawing;ref drws electrical schematic 11829648
Printed Card Assembly NSN 5998-01-158-8255.
NSN 5998-01-158-8255 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 6920-01-142-2858 | Training Target Holding Set |
| NSN 6920-01-158-2231 | Drive Assembly Motor |
| NSN 6920-01-158-2234 | Actuator Assembly |
| NSN 6920-01-158-2236 | Hit Sensor |
| NSN 5998-01-158-2295 | Printed Wiring Board |
| NSN 5895-01-158-8166 | Electronic Communication E Cover |
| NSN 6150-01-158-8231 | Conductor Bus |
| NSN 5998-01-158-8254 | Circuit Card Assembly |
| NSN 5998-01-158-8255 | Circuit Card Assembly |
| NSN 3110-01-161-1741 | Annular Ball Bearing |
| NSN 5935-01-161-1762 | Electrical Connector Backshell |
| NSN 5940-01-162-0341 | Grounding Terminal Strip |
| NSN 5925-01-168-6090 | Circuit Breaker |
| NSN 6920-01-203-2769 | Protective Cover |
| NSN 3040-01-211-8413 | Straight Shaft |
| NSN 5935-01-218-7936 | Electrical Receptacle Connector |
| NSN 5310-01-230-8813 | Flat Washer |
| NSN 5930-01-234-8168 | Switch Guard |
| NSN 5930-01-273-7975 | Toggle Switch |
| NSN 6920-01-391-2588 | Combination Target Frame |
A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. each component of the assemblage must be capable of functioning in accordance with its own item name. consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. it may also include printed electronic components. the item is generally part of a subassembly and cannot be assigned a more definite item name. for items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. for an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. excludes printed circuit boar
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Esd sensitive electronic device requirements of mil-std-129 apply.
Preserve by method 41 as follows: items subject to damage by electromagnetic and electrostatic field forces shall be initally wrapped in material conforming to mil-prf-81705, type iii, or bags conforming to mil-dtl-117, type ii, class h, style 2, or cushioned in material conforming to a-a-3129 or ppp-c-795, class 2 or ppp-c-1797, type ii, to prevent bag puncture, and unit packed in a heat-sealed bag conforming to mil-dtl-117, type i, class f, style 1. reclosable cushioned pouches conforming to mil-dtl-81997, type i or ii, may be used in lieu of initial wrap or cushioning. lead or terminal configurations for all items shall be maintained as manufactured without causing loads or stresses capable of causing damage to the item. materials used to maintain item position and lead or terminal configuration shall permit item removal without damage to the item. electrostatic discharge (esd) sensitive caution labels shall be applied in accordance with mil-std-129. connectors and plugs (power or data) shall be covered with conductive caps/plugs.
No requirement.
Electronic Integrated Circuits and Microassembly Parts
Semiconductors
Parts Of Electronic Integrated Circuits and Microassembles
No special type of cargo code applicable.
Electrical appliances, small.
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| 09/16 | 12/16 | 03/17 | 06/17 | 09/17 | 03/18 | 06/18 | 09/18 | 12/18 | 04/20 |
|---|---|---|---|---|---|---|---|---|---|
| 56.00 | 20.00 | 95.00 | 84.00 | 7.00 | 89.00 | 91.00 | 93.00 | 49.00 | 42.00 |
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 11829321 | 2 | BF | 1 | 19200 |
| 11829321 | 2 | ZZ | 5 | 0DR48 |
| 11829321 | 2 | ZZ | 5 | 59475 |
| 11829321 | 2 | BF | 1 | 19200 |
| 11829321 | 2 | ZZ | 5 | 0DR48 |
| 11829321 | 2 | ZZ | 5 | 59475 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||