change location
321-802-5889
321-733-7477
Model or part number: A3084306
About this product
Major components:connector 3; printed wiring board 1; tip jack 8
Back Panel Assembly NSN 5998-01-336-6605.
NSN 5998-01-336-6605 Datasheet
Factory New, New Material, New Surplus, Overhauled, Serviceable, Repairable, and AS Removed / Used material will be accompanied by a Certificate of Conformance, and any other documents/trace when applicable. We have a 7 year record retention.
We are committed to quality and follow an AS9120 quality management system. AeroBase Group is HAZMAT certified and registered with DDTC,
ITAR, and Aviation Suppliers Association (ASA). All products are 100% inspected.
Quality Commitment »
Delivery of IN-STOCK orders ship same-day when order is placed before 2:00 PM EST.
Delivery dates for NON-STOCK items are estimates based on current backlog and are subject to confirmation at the time of order.
| NSN | Component Description |
|---|---|
| NSN 5910-01-334-7928 | Electrolytic Fixed Capacitor |
| NSN 5910-01-334-7929 | Electrolytic Fixed Capacitor |
| NSN 5910-01-334-7930 | Electrolytic Fixed Capacitor |
| NSN 5905-01-334-8536 | Film Fixed Resistor Network |
| NSN 5905-01-334-8537 | Film Fixed Resistor Network |
| NSN 5905-01-334-8538 | Film Fixed Resistor Network |
| NSN 5910-01-334-9679 | Electrolytic Fixed Capacitor |
| NSN 5905-01-335-4878 | Film Fixed Resistor Network |
| NSN 5960-01-336-0487 | Electron Tube |
| NSN 5920-01-336-1730 | Extractor Post Fuseholder |
| NSN 5935-01-336-1756 | Electrical Receptacle Connector |
| NSN 5962-01-336-3085 | Digital-linear Microcircuit |
| NSN 5935-01-336-3248 | Electrical Receptacle Connector |
| NSN 5935-01-336-3255 | Electrical Receptacle Connector |
| NSN 5935-01-336-3256 | Electrical Receptacle Connector |
| NSN 5935-01-336-3257 | Electrical Receptacle Connector |
| NSN 5930-01-336-3702 | Toggle Switch |
| NSN 5998-01-336-3751 | Electronic Components Assembly |
| NSN 5998-01-336-3752 | Circuit Card Assembly |
| NSN 5998-01-336-3753 | Circuit Card Assembly |
| NSN 5935-01-336-5372 | Connector Adapter |
| NSN 5935-01-336-5377 | Electrical Receptacle Connector |
| NSN 5935-01-336-5378 | Electrical Receptacle Connector |
| NSN 5935-01-336-5379 | Electrical Receptacle Connector |
| NSN 5935-01-336-5472 | Electrical Connector Guard |
| NSN 5961-01-336-5485 | Transistor |
| NSN 5961-01-336-5490 | Semiconductor Device Set |
| NSN 5999-01-336-5522 | Electrical Contact |
| NSN 5355-01-336-5785 | Knob |
| NSN 5935-01-336-6401 | Electrical Receptacle Connector |
| NSN 5935-01-336-6402 | Electrical Receptacle Connector |
| NSN 5935-01-336-6505 | Electrical Connector Bracket |
| NSN 5998-01-336-6605 | Backplane Assembly |
| NSN 5935-01-336-6894 | Electrical Plug Connector |
| NSN 5961-01-336-7779 | Unitized Semiconductor Devices |
An insulating panel upon which two or more connector, receptacle, electrical, are mounted, and completely processed electrical conductor paths are deposited, etched, or printed in various paths. it provides or completes a circuit between two or more circuit card assembly or electronic components assembly. it may be designed for panel or chassis mounting, or for insertion into a connector, receptacle, electrical. includes motherboards. for items containing processed electrical conductor paths and contacts for plug-in connecting facilities, see printed wiring board. see also printed circuit board; circuit card assembly and cable assembly, printed, flexible.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Items or packages that require packing for acceptance by the carrier shall be packed in exterior type shipping containers in a manner that will ensure safe transportation at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized: (a) postal regulations, (b) department of transportation regulations, (c) civil air regulations, (d) uniform freight classification rules, (e) national motor freight classification rules, (f) american truckers' association rules, (g) other applicable carriers' rules, (h) military air regulations for dangerous materials. consolidation of shipments. all exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be consolidated, using flat pallets, box pallets, or containers as the consolidating media. dangerous goods shall be prepared for shipment according to applicable department of transportation (dot) regulations and international regulations in effect at time of shipment. shipment by parcel post must comply with postal regulations.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Esd sensitive electronic device requirements of mil-std-129 apply.
Preserve by method 41 as follows: items subject to damage by electromagnetic and electrostatic field forces shall be initally wrapped in material conforming to mil-prf-81705, type iii, or bags conforming to mil-dtl-117, type ii, class h, style 2, or cushioned in material conforming to a-a-3129 or ppp-c-795, class 2 or ppp-c-1797, type ii, to prevent bag puncture, and unit packed in a heat-sealed bag conforming to mil-dtl-117, type i, class f, style 1. reclosable cushioned pouches conforming to mil-dtl-81997, type i or ii, may be used in lieu of initial wrap or cushioning. lead or terminal configurations for all items shall be maintained as manufactured without causing loads or stresses capable of causing damage to the item. materials used to maintain item position and lead or terminal configuration shall permit item removal without damage to the item. electrostatic discharge (esd) sensitive caution labels shall be applied in accordance with mil-std-129. connectors and plugs (power or data) shall be covered with conductive caps/plugs.
No requirement.
Electronic Integrated Circuits and Microassembly Parts
Semiconductors
Parts Of Electronic Integrated Circuits and Microassembles
Electrostatic sensitive device (esd).
Electrical appliances, small.
Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps).
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
| 04/18 | 05/20 |
|---|---|
| 6.00 | 6.00 |
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by the OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| A3084306 | 1 | ZZ | 5 | 26916 |
| A3084306 | 2 | TX | A | 80063 |
| A15305 | 2 | ZZ | 5 | 05584 |
| A3084306 | 9 | TX | 5 | 15280 |
| Name | No. Items | |||
|---|---|---|---|---|
| [You must be logged in to use lists] | ||||