Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Gasket closure
NSN
National Stock Number:
TXT
Description:
Nonmetallic Strip Seal
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Circular
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-40.0 degrees fahrenheit and 180.0 degrees fahrenheit
MRC:
The length of a straight line which passes through the center of a cross section,and terminates at the outside circumference.ADVL
Cross Section Outside Diameter:
Between 0.562 inches and 0.637 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
MEDI-UM-TAC-TICA
MRC:
The structural characteristic of the item.CQCF
Construction:
One-piece
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber butadiene-acrylonitrile class nbr or rubber butadiene-styrene class sbr or rubber isobutylene-isoprene class iir or rubber chloroprene class cr or rubber polyacrylate class acm or rubber silicone class q or rubber polyisoprene natural class nr or rubber polysulfide class t
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Lgth 169.18 & 171.18 ; material is rubber per specification astm d2000 & m2bc407a14b14c12f17 per mil-r-3065
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Vulcanize or cement 100 percent of the cross section; butt or scarff joint; if scarf joint is used the length of skive not to exceed 1.25 in.
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
94231-05855 manufacturers standard
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
Outer diameter & length
