Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
0.094 deep notch 90.0 diameter 0.984 in. From and perpendicular to slotted end
NSN
National Stock Number:
TXT
Description:
Headless Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Slotted
MRC:
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.ACHT
Pinlength:
1.781 inches
MRC:
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.ACHU
Pindiameter:
Between 0.3720 inches and 0.3740 inches
First End Slot Width:
0.062 inches
Second End Slot Width:
0.062 inches
MRC:
The measured distance from a fixed point to a variable point on a curve or curved surface.ALWR
First End Corner Radius:
0.062 inches
First End Slot Depth:
0.062 inches
Second End Slot Depth:
0.062 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
23.0 rockwell c and 30.0 rockwell c
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1030 or steel comp 1050
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed standard 66, aisi/sae 1030 federal standard 1st material response or federal standard 66, aisi/sae 1050 federal standard 2nd material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
