Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Panel Screw Assembly
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
Between 0.297 inches and 0.327 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
0.423 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Knurled no. 5
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.280 inches and 0.320 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.775 inches and 0.835 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
Cross recess type 1
MRC:
The thickness of the material to be accommodated.AGSM
Material Accommodated Thickness:
0.062 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.138 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
720000 pounds per square inch
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 301 secondary washer or steel comp 302 secondary washer or steel comp 302b secondary washer or steel comp 303 secondary washer or steel comp 303se secondary washer or steel comp 304 secondary washer or steel comp 304l secondary washer or steel comp 305 secondary washer or steel comp 308 secondary washer or steel comp 309 secondary washer or steel comp 309s secondary washer or steel comp 310 secondary washer or steel comp 310s secondary washer or steel comp 314 secondary washer or steel comp 316 secondary washer or steel comp 316l secondary washer or steel comp 317 secondary washer or steel comp 321 secondary washer or steel comp 347 secondary washer or steel comp 348 secondary washer or steel comp 384 secondary washer or steel comp 385 secondary washersteel comp 302 primary washer or steel comp 302b primary washer or steel comp 303 primary washer or steel comp 303 plus x primary washer or steel comp 303se primary washer or steel comp 303cu primary washer or steel comp 303ma primary washer or steel comp 304 primary washer or steel comp 304l primary washersteel comp 302 spring or steel comp 302b spring or steel comp 303 spring or steel comp 303 plus x spring or steel comp 303se spring or steel comp 303cu spring or steel comp 303ma spring or steel comp 304 spring or steel comp 304l springsteel comp 302 stand-off or steel comp 302b stand-off or steel comp 303 stand-off or steel comp 303 plus x stand-off or steel comp 303se stand-off or steel comp 303cu stand-off or steel comp 303ma stand-off or steel comp 304 stand-off or steel comp 304l stand-offsteel comp 301 threads or steel comp 302 threads or steel comp 302b threads or steel comp 303 threads or steel comp 303se threads or steel comp 304 threads or steel comp 304l threads or steel comp 305 threads or steel comp 308 threads or steel comp 309 threads or steel comp 309s threads or steel comp 310 threads or steel comp 310s threads or steel comp 314 threads or steel comp 316 threads or steel comp 316l threads or steel comp 317 threads or steel comp 321 threads or steel comp 347 threads or steel comp 348 threads or steel comp 384 threads or steel comp 385 threads
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate secondary washerpassivate primary washerpassivate springpassivate stand-offpassivate threads
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 federal specification single treatment response secondary washerqq-p-35 federal specification single treatment response primary washerqq-p-35 federal specification single treatment response springqq-p-35 federal specification single treatment response stand-offqq-p-35 federal specification single treatment response threads
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
