Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Filler foam
NSN
National Stock Number:
TXT
Description:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
17.200 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
4.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
20.940 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
3roughly rectangular; right/short edge has 3 cutouts: 1.26wx1.24h, 2.16 from bottom and 3.30wx4.86h, 5.00 from bottom; far side has cutout 1.90dx3.50hx4.90w, 9.10 from bottom right and cutout 4.90wx3.50hx1.08d, 9.10 from bottomleft edge and trapezoidal cutout with base 4.00wx12.80l and top 2.00wx12.80l and height of 1.50 inch running crosswise, starting 3.60 from right edge and 2.16 from bottom; near side has groove 2.15wx2.36d along top edge and groove 2.32wx2.00d along top edge and has triangular strip cut off top right edge between crosswise grooves, 4.90 from right to depth of 1.90 on right edge and similar piece cut off left edge - see drawing; near side is marked "up" and "aft" near top center and with part number in center of bottom groove
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
