Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Chamfer on second end, 0.060 in. By 30.0 deg; chamfer on right edge of groove on first end, 0.060 in. By 30.0 deg
NSN
National Stock Number:
TXT
Description:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved
First End Groove Width:
0.1200 inches
First End Groove Diameter:
2.9400 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved
Second End Groove Width:
0.1200 inches
Second End Groove Diameter:
2.9400 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 10.080 inches and 10.140 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2330-01-303-8832 m1000 chettl trailer
First End Distance From End To Groove:
1.000 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 3.0380 inches and 3.0390 inches
Second End Distance From End To Groove:
1.000 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 2.9750 inches and 2.9760 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
3.039 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1026
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a519, grade 1026 assn standard single material response or astm a513, type 5, grade 1026 assn standard single material response
