Recently Added or Updated

maximum dielectric withstanding dc voltage 1.25 kilovolts at sea level

follower shaft made by bourns instruments inc. nsn 3040000189416.

nsn 6760000189415 post by bourns instruments inc.

aluminum alloy coupling made by bae systems. the style designator is a male coupling half. the overall length is 1.96in. ⁓1-31/32. nsn 4730000189408.

us army aviation and missile capacitor with a plastic case material. the insulation resistance is at 4000.0 megohm-microfarads. the terminal type and quantity is listed at a 2 uninsulated wire lead. nsn 5910000189404.

single shaft wire wound variable resistor by bliss e w co. the terminal location is on the rear end and there is a clamp ring for mounting. the electrical resistance per section is 20.0 kilohms single section. nsn 5905000189402.

gear and tube assem made by bourns instruments inc. nsn 3020000189401.

steel comp pin made from ordnance corps with a diameter of 0.5 inches and underloop length of 2.75 inches. nsn 5315000189396.

receptacle connector with a shell material of aluminum alloy 6061. the shell surface is anodized and there are 12 single mating end single contact groupings. nsn 5935000189393.

power rating per characteristic 500 milliwatts total power dissipation

leg length 1.5 inches 1st end

leg length 1.5 inches 1st end

receptacle connector with a nominal thread size of 0.099in. ⁓7/64. the shell is solid with a material of copper alloy. the nominal thread size is 0.099in. ⁓7/64 with a 56 thread quantity per inch. nsn 5935000189387.

silver shell surface receptacle connector with an unthreaded mounting hole diameter of 0.099 inches. the center to center distance between mounting facilities parallel to height is 0.5 inches. nsn 5935000189383.

hexagon screw with a 20 thread quantity per inch. the screw is made out of steel with a surface treatment of cadmium or zinc. the hardness rating is between 23 rockwell c and 30 rockwell c. nsn 5305000189345.

screw with a thread quantity per inch of 24. the minimum tensile strength is 120000 pounds per square inch. the screw is made of steel material and a surface treatment of cadmium and chromate or zinc and chromate. nsn 5305000189335.

leg length 0.66 inches 1st end

maximum operating temp 232 degrees celsius single response

tube to hose elbow nsn 4730000178840. the maximum operating temp is 450.0 degrees fahrenheit single response

cycli control stick with an ah-1 made by bell helicopter textron inc. nsn 1680000189343.

radio frequency interfere filter with an operating current per function in amps of 1.3. the enclosure type is hermitically sealed. there are two 6-32nc thdmtg studs irregularly spaced. nsn 5915000189332.

radio frequency interfere filter with an overall length of 2.281in. ⁓2-9/32. the body outside diameter is 1.062 inches. the operating current rating per function in amps is 1.3. nsn 5915000189328.

plug connector with a solid aluminum alloy shell type. the distance from the centerline to connector end is 2.994 in with a 3.447 distance from the centerline to cable end. there is a 16 thread quantity per inch. nsn 5935000189353.

radio coil with a maximum operating temp of 125 degrees celsius. the winding conductor size is 0.0210 inches american wire gage single component single winding with a winding operating current of 260.0 milliamperes dc single component nsn 5950000189323.

diode semiconductor device with a hermetically sealed case. the material is germanium with a terminal type of 2 uninsulated wire lead. nsn 5961000189326.

machine screw nsn 5305000178832. the head diameter is between 0.666 inches and 0.698 inches

machine screw nsn 5305000178823. the thread length is between 1.042in. and 1.125in. ⁓1-1/8

o-ring nsn 5331000178831. the sectional height cross is 0.095 inches

welding torch collet made by esab group inc with an electrode diameter of 0.125 inches. nsn 3431000188331.

welding torch collet made by esab group inc. has a 0.125 in electrode diameter. nsn 3431000188321.