Aircraft Elevators Parts

End item NSN parts
Filter By: Needle Roller Bearings
page 1 of 1
Part Number
NSN
NIIN
105DR Needle Roller Bearing
002273209
159116 Needle Roller Bearing
002896693
2552051-3 Needle Roller Bearing
002273209
309-1135-030 Needle Roller Bearing
001567724
3110002273239 Needle Roller Bearing
002273239
35004-64 Needle Roller Bearing
002273221
353055 Needle Roller Bearing
002273209
37234 Needle Roller Bearing
002273209
37918-40001 PC 76 Needle Roller Bearing
008217618
407754 Needle Roller Bearing
002273239
416328 Needle Roller Bearing
008217618
416328-1 Needle Roller Bearing
008217618
473116 Needle Roller Bearing
001567724
50602 Needle Roller Bearing
002273239
67AX95 Needle Roller Bearing
001567724
689369 Needle Roller Bearing
008217618
701-7070554 SH 1 PC 4 Needle Roller Bearing
002273221
704AS9303-3 Needle Roller Bearing
001567724
7D3-05153 IT NO Needle Roller Bearing
008217618
804333 Needle Roller Bearing
008217618
Page:

Elevators, Aircraft

Picture of Aircraft Elevators

Elevators are flight control surfaces, usually at the rear of an aircraft, which control the aircraft's pitch, and therefore the angle of attack and the lift of the wing. The elevators are usually hinged to the tailplane or horizontal stabilizer. They may be the only pitch control surface present, sometimes located at front (early airplanes) or integrated into a rear "all-moving tailplane" also called a slab elevator or stabilator.

The horizontal stabilizer usually creates a downward force which balances the nose down moment created by the wing lift force, which typically applies at a point (the wing center of lift) situated aft of the airplane's center of gravity. The effects of drag and engine thrust may also result in pitch moments that need to be compensated with the horizontal stabilizer.

Both the horizontal stabilizer and the elevator contribute to pitch stability, but only the elevators provide pitch control. They do so by decreasing or increasing the downward force created by the stabilizer :

Compare Now »
Clear | Hide